View Full Version : aan flywheel

25-10-09, 03:40 PM
The car is a urs4 aan engine changed to manual from auto.
The flywheel is from a 2.8 v6 240 mm dual mass.
I mounted a sachs new clutch(no springs due to dual mass flywheel)
The center part splited from the external part:|
The dulal mass flywheel(the clutch side vs the engine side) can be turned left and right by hand a fiew mm.Is this normal?That's why the disc had been broken?
I had a dual mass flywheel broken on my vw lt but it was getting a horrible noise.

What flywheel can be fited on aan?Because the dual mass costs around 800eur(NEW)

Thank you

26-10-09, 12:22 AM
I think you will have a problem using that V6 flywheel. The AAN dual mass flywheel PN 034105266C does not cross over to any V6 applications. I suspect one reason might be is the crank position sensor timing pin *could* be unique to the AAN ECU. The ABY flywheel 034105266E crosses over to the RS2 ADU but again, not to any V6s.

Sorry, I think you at least have to find a used AAN flywheel.

By the way, some play in the dual mass flywheel is allowable.

28-10-09, 10:15 PM
the pin is solved,i mounted one calculating the exact position with the auto"flywheel"(in fact it is not a flywheel)The car is running with the seccond sachs clutch disc,but i don't hnow for how long.This in making me mad...
i'd like to go with a single mass flywheel and a spring tipe clutch disc but i don't know witch...
thank you

04-01-10, 10:38 PM
second clutch disc broken.....NO BRUTAL START!!!Full gas only after 20/h
Tomorow i'll make some pictures.I think sachs sells to Romania only shxt.
A ng clutch including flywheel(normaly)?:|

04-01-10, 11:36 PM
You need this stuff....
7A Flywheel
Reinforced Clutch Cover- 883082 999707
Clutch Disc - Racing -881864 000685

05-01-10, 03:34 AM
i have one aan dual mass flywheel.

05-01-10, 09:39 PM
You need this stuff....
7A Flywheel
Reinforced Clutch Cover- 883082 999707
Clutch Disc - Racing -881864 000685
sm flywheel and NO SPRING disc....Had no problems with that?i mean driving in city or so...
@nemilosu:pm with a price(good to have one in case....)
ut im thinking to go to sm fly.The disc is 228 at sm?
Had no time to make pics.
I found another sachs code for sale,240 mm,23 teeth....
Tomorow it will be here and i'll see if it has more solid mountings.I'll make pics.:|

05-01-10, 11:37 PM
size is 240mm and 23 teeth..
http://cgi.ebay.de/Kupplungsscheibe-Sachs-Performance-Audi-RS2-ADU-S2-ABY_W0QQitemZ170387061250QQcmdZViewItemQQptZAutote ile_Zubeh%C3%B6r?hash=item27abdc3a02
i have a dualmass flywheel as well somewhere...

06-01-10, 06:52 AM
you make the price :D

06-01-10, 02:37 PM
the disc arived today.No good.It was spring tipe and did not fit my dual mass fly'.
I can easy buy a sm fly' from a 2.3 or 2.2 normal aspirated engine.Will be the clutch disc stronger than those 2 discs i have broken?
What part number do you use for aan dm fly' clutch disk?
Some pics with the broken two discs from sachs:

06-01-10, 04:23 PM
If you have a dm flywheel you need this disk-881864 999526
If you have a sm flywheel you need this disk-881864 000685

my opinion is throw the dualmass away get a 7a and get happy.

06-01-10, 08:22 PM
7a fly is hard to find here(romania).7a disc is about 250 eu+pressure plate+fly:beat:
aan disc 300 eu(i think audi dealer will sell it)..
what about ng fly+plate+pressure plate?i can easy find all of them(plate and pressure plate new and fly used)

06-01-10, 08:27 PM
I can get you a 7a fw for 270 euro new...my dealer has 2 in the shelf..
i have some unused aan sachs part in my garage.
i just have to check the numbers and let you know asap.

11-01-10, 09:31 PM
i found a 240mm(disc size) SM fly.Payed 100 eur for it,BUT:
1.what engine code was it from?034105271f???
2.it has no bearing...i-ll mount one,can it be a normal bearing witx ext and int to fit?
It is very light
It has the timing pin
It is very thin compaired to dm...
What is it??

11-01-10, 10:03 PM
(7A motor): 034 105 270 K (SMF)
3b,7a,nm are the same numbers.Audi 200/20v is different and wont fit!!!
bearing should be avail. from 034 i think.


11-01-10, 10:31 PM
nice one!!
but what engine had mine034105271f?in does not apear in etka.It is very lite.Seller has a "rally"(how he cals it)inline5 but he does not want to say what code is it.Some say he keeps his engines loked in basement,some say they have seen his coupe running with this engine for a short distance after the engine made BOOM.Other say he had a truck turbo on it:lol:
What could it be?The fly doesn's seem to be "home lightened"..

12-01-10, 06:22 PM
Found it.
Etka says that 034105271f is replaced with 034105270s.This code of fly equipped audi quattro sport mb.rr,wx engine codes...not bad.will see how it rews

21-04-11, 03:03 PM
i want buy the same presure plate and clutch disk like you from sachs perfomance. i want ask you i have 3b sm flywheel can fit this set on my urS4 2.2T 6 GANG. So 3b flywheel +Reinforced Clutch Cover- 883082 999707
Clutch Disc - Racing -881864 000685.


21-04-11, 05:00 PM
UrS4 can take S2 3B SM flywheel and clutch package for same engine and chassis with no problems, there is no spacer between engine and gearbox.

It's a simple dismantle and install job. 200 3B flywheel is different.

21-04-11, 09:57 PM
AFAIK Single mass flywheel requres 8mm longer clutch slave cylinder pin than dual mass because the single mass is thinner than dual mass. At least when using 7A flywheel on AAN.

25-06-13, 06:37 PM
Is it really necessary with longer "slave pin" when you use the 7A-flywheel on an AAN? I have never read something about that on the swedish sites. And there is many people driving with that setup.