As I've stripped the old headlining material and also removed the old foam and glue I was wondering what had people used for retrimming again , I'm changing color but am unsure what thickness and where to buy from any help would be good cheers
Announcement
Collapse
No announcement yet.
Retrim headlining avant
Collapse
X
-
I used Black foam backed headliner fabric 5mm on ebay when doing mine. Also use the correct glue. I used 3M Super 90.
Mine:
http://www.s2forum.com/forum/showpos...&postcount=263
-
Originally posted by irishs2 View PostI used Black foam backed headliner fabric 5mm on ebay when doing mine. Also use the correct glue. I used 3M Super 90.
Mine:
http://www.s2forum.com/forum/showpos...&postcount=263
Comment
-
Originally posted by Typ89 View PostI've redone mine in grey alcantara type fabric. You can buy it on Ebay with the foam backing already gluid on to it.
I can recommend buying some extra in the same colour but without the foam backing to trim the A,B and C pillars with.
Comment
-
Hi,
I went thru replacing my headlining a while back and hit a problem with the glue not sticking, its important to keep the board clean and dry, check out the thread called "Headlining Adhesive Problem"
I used grey alcantara and did all the pillar trims. Its a time consuming job but its worth the effort.
Good luck.
PAUL
Comment
-
Originally posted by nip View PostLooks fantastic Eric, I did look for it in your pm u sent but couldn't find Which one , I have found some 3mm foam backed material i wanted to make sure it wasn't too thick cheers
Which ever material you get make sure its 4-way stretch material. Otherwise you could get wrinkles around the tight areas
Comment
-
Originally posted by RS2junkie View PostHi,
I went thru replacing my headlining a while back and hit a problem with the glue not sticking, its important to keep the board clean and dry, check out the thread called "Headlining Adhesive Problem"
I used grey alcantara and did all the pillar trims. Its a time consuming job but its worth the effort.
Good luck.
PAUL
Comment
-
Comment