I've bought a brake servo conversion 8A2612105 part number for brake servo but I'm missing the one way valve and I believe the the rubber which the valve sits into brake servo could any one point me where to get hold of them from please or even better part numbers
Announcement
Collapse
No announcement yet.
Brake servo part numbers
Collapse
X
-
-
I have butchered my solid line, which I got with the servo, so that I have re-used the parts with only a few additions. I'll post up when I am with the car and finish it off but it should be fairly neat and tidy.Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss
Comment
-
Hi rusty I had a look at Andyp car last night and he's use 10mm vac pipe attached it to one way valve and on the 8mm metal pipe underneath inlet as he's delete the n80 evaporate fuel valve and also he's fitted a forge valve as well,which brings me back to 1.8t valve can it be used or not but thanks rusty
Comment
-
All depends on what size hose you use.
1.8T valve can be used, there is also a larger diameter valve 191 611 933 which is used on the T3 bus.
I have two in series as extra insurance against boosting the servo.
I also found the OE right angled check valve that fits into the servo is separate on the B5 - 191611933F
HTHPanthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 Avant
Comment
-
Originally posted by Error404 View PostAll depends on what size hose you use.
1.8T valve can be used, there is also a larger diameter valve 191 611 933 which is used on the T3 bus.
I have two in series as extra insurance against boosting the servo.
I also found the OE right angled check valve that fits into the servo is separate on the B5 - 191611933F
HTH
Comment
Comment