Announcement

Collapse
No announcement yet.

Problem with bushings subframe B3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem with bushings subframe B3

    Hey guys.

    Have af problem. My car throbs when I run over something.
    There are new bushings in the subframe. and new shock absorbers, springs. have discovered my bushing may not seated properly. can confirm it ?
    Attached Files

  • #2
    Please correct me if I'm wrong but to me it looks like that bush is not fully pressed in to the subframe.It looks like few mm out.

    Comment


    • #3
      Yes you can see the metal collar is not fully inside the subframe as its supposed to be. So the subframe must not be sitting square on the car. I would take this back to whoever fitted it.

      Comment


      • #4
        Whole bush is not pressed in probably need to get it off the car and get a new one pushed in as I would think that's now toast
        sigpic

        1992 3b S2 Coupe

        Comment


        • #5
          What may have happened is the front bushes were fully pressed home only to have been partially pressed back out if the car was lowered using a trolley jack on the subframe near the bushes.

          Comment

          Working...
          X