Announcement

Collapse
No announcement yet.

Bens Audi 80 track car project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bens Audi 80 track car project

    I have another car to finish off for some one else with lots of nice parts and toys on. Building it for Club/Pro Time attack spec.

    Out line of spec

    Engine

    GTX35R
    Custom pistions
    KKD manifold
    Antique wagner inlet ( first edition )
    Tial 50mm gate
    Tial BOV
    Adjustable pulleys
    Machined breathers
    Wiggings style fittings with aluminum pipe work
    Solid lifters
    Triple plate clutch
    Griddle plate
    1.8T coils
    Error 404 Raychem harness
    Custom engine harness
    Tatech pro ecu
    4" down pipe
    Rear mounted rad
    dual 044 pumps
    Walbro 450 lift in tank
    1000cc injectors
    Billet fuel rail
    Turbo smart FPR

    Suspension / Geo

    Audi motorsport dampers 2 way adjustable light weight aluminum casings
    Tubular front wish bones with rose joints
    Rear end powerflex bushed with rose joint linkages
    DMD hub to damper billet brackets
    Front strut towers corrected
    Lower king pin extended to correct wish bones
    DMD motorsport steering bracket with rose joints
    MR2 rear mounted PAS pump

    Brakes

    Front 8 piston RS6 DMD carriers
    Padgid RS14 pads
    Rear 4 piston porsche with extra hand brake calipers


    Exhaust

    4" down pipe
    4" oval along centre section
    4" round over shafts to rear box
    3x simonds silencers
    All V bands

    Saftey

    5 point harness's
    multi point cage with suspension tied in
    life line fire
    fire wall
    roll over valves






    Rear rad with Craig Davies water pump



    Fan Cowl and inlet housings from rear window



    Cleaned rack with DMD bracket



    Home made fuel manifold -8AN

    Last edited by terrybullwon; 17 March 2016, 00:17.
    Chef

  • #2
    Ajustable top mounts set back to 6 degrees of castor before
    Last edited by terrybullwon; 17 March 2016, 09:21.
    Chef

    Comment


    • #3
      Rota wheels



      Error 404 harness



      4" down pipe and motor


      Chef

      Comment


      • #4
        Tail pipe

        Chef

        Comment


        • #5
          It's scary....
          Step 1: setup. <==
          Step 2: potentiation.
          Step 3: enjoy.

          Comment


          • #6
            Hub carriers from DMD

            Chef

            Comment


            • #7
              4" down pipe friendly sub frame with solid gear box mounts



              4" down pipe



              More billet from DMD

              Steering arms for the dampers

              Chef

              Comment


              • #8
                Great work! Will love seeing a 5 pot audi Tie Attack car. Much more interesting than the usual collection of evos

                Comment


                • #9
                  Excellent, perfect body the saloon and a great spec. Impressive work chef!

                  Comment


                  • #10
                    Loving your work Chef
                    Those steering arms and hub adapters are sweet.
                    I've been playing with some similar designs for steering arms to be able to correct some bump steer but keep road car rod ends. How much have you been able to dial out?
                    Panthero Coupé quattro 20vt
                    Indigo ABY coupé
                    Imola B6 S4 Avant

                    Comment


                    • #11
                      Nice project! From where are you going to take the air intake to the rad, and what size hose are you going to use? My friends PKKM typ85 is taking the air from the small rear side windows with 250mm hose. Can post up a pic if wanted.

                      Audi UrS4 Avant 2.5 20vt - twincharged - Project
                      Audi 80q B4 Sedan 2.2 20vt - Daily user
                      BMW 320d Touring e91 M-Sport - Daily user
                      BMW 740iA e38 - Project

                      Comment


                      • #12
                        Originally posted by Error404 View Post
                        Loving your work Chef
                        Those steering arms and hub adapters are sweet.
                        I've been playing with some similar designs for steering arms to be able to correct some bump steer but keep road car rod ends. How much have you been able to dial out?
                        i think from full droop to full bump we should see 0-2 or 0-3
                        Its hard to tell at the minute as the springs only turned up yesterday and i have not got the car on the deck yet to set the toes to 0.0. I had to have some custom springs made to get the sizes and rates i wanted I got them from D faulkner they do alot of Btcc stuff and nearly every historic race car.







                        Originally posted by Thuppu View Post
                        Nice project! From where are you going to take the air intake to the rad, and what size hose are you going to use? My friends PKKM typ85 is taking the air from the small rear side windows with 250mm hose. Can post up a pic if wanted.
                        Sounds exactly what we have in place

                        Purple fuel rail

                        Chef

                        Comment


                        • #13
                          Do you have some more pictures of the exhaust?

                          Comment


                          • #14
                            nice car project james!
                            it looks that money is no object
                            audi coupe quattro b2 2.2 20vt project (573hp-626nm)
                            TWINCHARGED power,zero lag
                            AEM W/M injection

                            Comment


                            • #15
                              That looks fantastic Terry. How much would something like this cost to have built? Was thinking of moving my AAH CQ on but having seen this I'm now having other ideas....
                              Andrew
                              Witham St Hughs, Lincolnshire
                              • 1998 Audi Cabriolet 2.6 V6
                              • 1995 Audi Quattro Coupe 2.8 V6 FOR SALE
                              • 2011 Vauxhall Insignia 2.0 CDTi

                              Comment

                              Working...
                              X