Announcement

Collapse
No announcement yet.

AQTdriver

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • AQTdriver

    has anyone got the contact tel of this member [please pm if so] it looks as though he sold me a pair of fake cams . I paid him £700 for a pair of shick cams , I didn't use them so have recently sold them foe almost half the price only to be told they are not genuine

  • #2
    Hi Ray how do you know they are fake? Shrick use the same factory blanks as Audi
    Chef

    Comment


    • #3
      hi that's what I thought ? I know the cams were a few years old but hadn't been used , the part number was poorly ingraved on them rather than lazor etched but that's all I know . the s2member that has them now and wants his money back says the lift is not even the same as shircks spec for that cam apparently 10.3 lift but should be 10.9

      Comment


      • #4
        Juris is his name and the cams are real as i have seen them myself .

        Comment


        • #5
          Originally posted by A1quattro View Post
          hi that's what I thought ? I know the cams were a few years old but hadn't been used , the part number was poorly ingraved on them rather than lazor etched but that's all I know . the s2member that has them now and wants his money back says the lift is not even the same as shircks spec for that cam apparently 10.3 lift but should be 10.9
          Originally posted by will20v View Post
          Juris is his name and the cams are real as i have seen them myself .
          Mine are the same Ray

          one etched by hand and one laser etched the one etched by hand.
          Chef

          Comment


          • #6
            I'm the one who bought these cams. It was stupid of me to not ask for pics. I thought I was buying Schrick 260/10.9 cams, billet looking like pops cams here: http://forums.quattroworld.com/s4s6/msgs/130816.phtml I don't wan't to cancel the deal, because these can be usable, but they are not the ones I was after. A little bit expencive though, could have done re-grinding on 7A cams for a lot less.

            Measured 10.3mm lift on them, but I havn't measured the duration yet. And I just measured the difference in base circle and lift, if the base circle starts to rise on the sides, then it can be some small difference. Any how base circle is smaller than on stock cams, so they could been re-grinded of 7A cams for example. They also have some wear on the bearing surfaces, but other wise looks like never used, like just re-grinded. Even Repo don't remember seeing Geniune Schrick cams that has been made of Audi blanks, always seen the "billet" ones. Here is some 7A vs this Schrick intake cam comparision:










            Audi UrS4 Avant 2.5 20vt - twincharged - Project
            Audi 80q B4 Sedan 2.2 20vt - Daily user
            BMW 320d Touring e91 M-Sport - Daily user
            BMW 740iA e38 - Project

            Comment


            • #7
              Wow!
              There are huge optical difference between them.shircks fuly machined and looks like they worth so much money.
              Sorry for you guys.

              Comment


              • #8
                Of course there is a chance these are really old Schrick camshafts, "first batch" etc..? Havn't got any confimation from Schrick GmbH. But the fact that the bearing surfaces has wear and the other parts are like new gets me suspicious, I don't think Schrick use used "blanks" for re-selling..? There is also a possibility that Schrick has done custom work on customer bits?

                Audi UrS4 Avant 2.5 20vt - twincharged - Project
                Audi 80q B4 Sedan 2.2 20vt - Daily user
                BMW 320d Touring e91 M-Sport - Daily user
                BMW 740iA e38 - Project

                Comment


                • #9
                  He's a genuine guy, I bought some chips from him a while back and he let me try them first before I paid, was a genuine pleasure to deal with as were you thuppo with the rs2 turbo

                  Comment


                  • #10
                    Bought of this man also and he is an honest fella, sure things will be worked out fine

                    Comment


                    • #11
                      shrick cams

                      ive have just spoken to AQTdriver [the person I bought these cams from ] and he has confirmed 100% that the cams are genuine shrick cams , they are several years old [could be 5 +years but were not used . shrick do use original audi cams then regrind them, I assume the spec most have been slightly different to the current specs listed .Thppu AQTdriver is going to send you apm to confirm the cams are genuine .

                      Comment


                      • #12
                        last post meant to say ,, shrick DO use audi cams then regrind them , several people have confirmed this ,also they used to etch the code number on the cams but nowadays they are lazor etched [looks neater]

                        Comment


                        • #13
                          Ray,
                          His name is Juris Nemenis.i can confirm you this guy always stand behind his parts.
                          I bought some parts from him but turned out one of the parts was not working.
                          I left the money with him over 6months since i was thinking to get some other
                          Parts instead. unfortunately he sold all of his parts so he refunded the money back
                          after 6 months.if he's going to cheat me,he can do it anytime since it's over disput
                          Period from Paypal.
                          If anyone need the photos of Dr.Schrick cams i can post upon request from comparison.
                          Mine is 99% almost new.Only 2,000kms on cams.
                          one of a few I5 from Asia.

                          Comment


                          • #14
                            Sorry for wrong typo.damn it my thumbs are bigger than
                            Iphone keyboard.
                            one of a few I5 from Asia.

                            Comment


                            • #15
                              I have no doupt that Juris and Ray has bought these as geniune Schricks. They where buyed from Quattro corner. But there is something that don't feel right with these.

                              1. The fact that Schrick makes totally different looking billet style cams for these engines, and according to Jyrki Repo they have always been looking the same(and he has installed a lot of them).

                              2. Quattro corner did tell they came from BR Motorsport california. Why order Schricks from USA when you can get them from Germany easier?

                              3. I did understand that these where new and havn't been used by Juris or Ray? And still the bearing surfaces has wear on them, but other wise they looks just re-grinded and newer used. Looks like re-grinded cams to me. Who has done it, I don't know? There is nothing eccept a hand etched writing that could tell these are Schrick cams. Even the end of the identify code is different than Schrick informs.

                              4. I would belive Schrick use the same base circle on their camshafts as on orginal Audi camshafts when the cams are supposed to be used with hydro lifters. Now there is a 0.5mm difference. These cams has smaller base circle diameter.
                              Last edited by Thuppu; 27 November 2015, 09:04.

                              Audi UrS4 Avant 2.5 20vt - twincharged - Project
                              Audi 80q B4 Sedan 2.2 20vt - Daily user
                              BMW 320d Touring e91 M-Sport - Daily user
                              BMW 740iA e38 - Project

                              Comment

                              Working...
                              X