Finnish users probably already know this, but i thought to share here also.
I'm building 5cyl b5 avant q, base model is 1996 2.8 30v.
I'm going to quickly explain last six months and update more regularly because translate work for would be pain in the @$$ to do.
Whole story can be found from audifinns forum, sadly finnish text but correct timeline on pictures http://www.audiclub.fi/audifinns/sho...d.php?t=154743
All of the pictures https://hammu.kuvat.fi/kuvat/I5B5/
Other random project madness from instagram https://www.instagram.com/thehammu/
Engine specs:
AAN block
JE pistons with hd pins, compession ratio 9.8:1
H-profile rods
7a ported head and modified 7a cams
Supertech valves and fcp springs + titanium retainers
Custom intake manifold made by kenax
Custom flywheel made by kenax
Tilton OT2 clutch
Billet dry sump oilpan and endplate made by kenax
ATI superdamper
PWR 600x300 intercooler
1100cc bosch ev14
Maxxecu engine management
Balanced bottom end
Glyco / kolbenschmidt bearings
Other stuff
Spax rsx coilover kit
Akmotorsport + powerflex bushings
Griffin aluminium radiator, trunk mount
2x 12" hayden fans
Aeroflow fuel tank
Powdercoated about everything
Rs4 driveline
I'll update specs more when i get more parts and so.
So far completed stuff
Engine bottom end
Engine, gearbox and driveline fitment
Rustwork from wheel arches under inner fenders
Radiator fitment
Front bumper/cooler support bracket
Rear suspension overhaul
I'm building 5cyl b5 avant q, base model is 1996 2.8 30v.
I'm going to quickly explain last six months and update more regularly because translate work for would be pain in the @$$ to do.
Whole story can be found from audifinns forum, sadly finnish text but correct timeline on pictures http://www.audiclub.fi/audifinns/sho...d.php?t=154743
All of the pictures https://hammu.kuvat.fi/kuvat/I5B5/
Other random project madness from instagram https://www.instagram.com/thehammu/
Engine specs:
AAN block
JE pistons with hd pins, compession ratio 9.8:1
H-profile rods
7a ported head and modified 7a cams
Supertech valves and fcp springs + titanium retainers
Custom intake manifold made by kenax
Custom flywheel made by kenax
Tilton OT2 clutch
Billet dry sump oilpan and endplate made by kenax
ATI superdamper
PWR 600x300 intercooler
1100cc bosch ev14
Maxxecu engine management
Balanced bottom end
Glyco / kolbenschmidt bearings
Other stuff
Spax rsx coilover kit
Akmotorsport + powerflex bushings
Griffin aluminium radiator, trunk mount
2x 12" hayden fans
Aeroflow fuel tank
Powdercoated about everything
Rs4 driveline
I'll update specs more when i get more parts and so.
So far completed stuff
Engine bottom end
Engine, gearbox and driveline fitment
Rustwork from wheel arches under inner fenders
Radiator fitment
Front bumper/cooler support bracket
Rear suspension overhaul
Comment