Announcement

Collapse
No announcement yet.

Brake question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brake question

    Hi,

    is there a chance that a set of rear brembos for an s2 running a 299mm disc would fit inside both s2 alloy versions?

    This size is used at the rear of an Rs2 but i fear has allsorts of different offsets, hub designs etc etc etc

    Just a thought as our Latvian Friend has a set forsale.

    Cheers,

    David
    sigpic

    1992 3b S2 Coupe

  • #2
    hehe I do ;-)

    Dunno about offsets.

    The only thing i can tell that they are brembos with 299x24mm and 5/130. And they are from BIG BRAKE RS2 modification. The one that goes with 322mm fronts.

    About 412$ for each from catalog here. I want 300$ for both.

    Picture


    Here is the discription if it helps :

    DISC BRAKE
    CALLIPER WITHOUT BRAKE PADS
    CALLIPER CARRIER
    BRAKE DISC (VENTILATED)
    BRAKE DISC (VENTILATED)
    (FOR MODIFIED VEHICLES)
    REAR
    BREMBO

    299X24MM-5/130
    PUNCHED
    299X24MM-5/130


    1 8A0 615 405 M CALLIPER WITHOUT BRAKE PADS LEFT
    (1) 8A0 615 406 M CALLIPER WITHOUT BRAKE PADS RIGHT
    2 8A0 615 411 CALLIPER CARRIER LEFT
    (2) 8A0 615 412 CALLIPER CARRIER RIGHT
    3 N 103 145 01 BOLT, HEX. HD. WITH SHOULDER M10X50
    4 N 102 090 05 HEX. NUT, SELF-LOCKING M10
    5 N 103 144 01 BOLT, HEX. HD. WITH SHOULDER M10X20 LT46
    6 N 100 829 06 BOLT, HEX. HD. (COMBI.) M6X16 LT46
    7 N 905 705 01 BOLT, HEX. HD. WITH SHOULDER M12X1,5X35
    9 8A0 615 601 C BRAKE DISC (VENTILATED) 299X24 5/130
    (9) 8A0 615 601 D
    BRAKE DISC (VENTILATED)
    (FOR MODIFIED VEHICLES) 299X24 5/130
    PUNCHED

    10 N 033 178 3 SCREW, CSK. HD. M6X13
    11 8A0 615 611 E SPLASH SHIELD FOR BRAKE DISC
    12 N 010 210 7 SCREW, HEXAGONAL HEAD M6X10K
    15 8A0 698 630 A REPAIR KIT SPRING PLATE
    16 8A0 698 630 REPAIR KIT SPRING PLATE

    17 8A0 698 671 SET OF GASKETS FOR CALLIPER PROTECTIVE CAP 30MM

    18 8A0 698 671 A SET OF GASKETS FOR CALLIPER PROTECTIVE CAP 28MM

    19 20 8A0 615 269 A SPEADER SPRING NOT A SPARE PART


    22 8A0 615 231 B DAMPING WASHER
    (ADHESIVE)
    FOR:
    PISTON
    30MM


    23 8A0 615 231 C
    DAMPING WASHER
    (ADHESIVE)
    FOR:
    PISTON
    28MM

    24 8A0 698 451 A 1 SET OF BRAKE LININGS
    ALSO USE:
    REAR
    8A0 615 231 B
    8A0 615 231 C

    (24) 8A0 698 451 B

    1 SET OF BRAKE LININGS
    (FOR MODIFIED VEHICLES)
    FOR BRAKE DISC:
    ALSO USE:
    REAR

    8A0 615 601 D
    8A0 615 231 B
    8A0 615 231 C

    25 211 611 483 DUST CAP
    26 8A0 615 273 BLEEDER VALVE AND DUST CAP
    Vadim.

    New engine (mechanical PKM head) , Alcon 332mm brakes , Pauter rods , Mahle pistons, GT30R , kw v2 sucpension , new exhaust. 608HP. For SALE !

    Comment


    • #3
      The disc is only 24mm - you'd be hard pushed to find a disc with the correct dimensions to be usable.

      The Porsche 944/968 uses 299x28mm discs on the front. Might be more practical than the Club Sport calipers which cost more
      Mike

      http://www.s2-audi.co.uk

      Comment

      Working...
      X