Hi,
I have a problem with an old 3b climate, when you put the contact on, works, after 2 seconds die...no lights, nothing...if you put the contact off and on again, the same, 2 seconds working, the unit remember what you select the time before (if it was showing outside temp. starts again with outside temp.) and then nothing.
I test the fuses and with another display unit and the same
I take a look at the schematics and I don't know where is "J127", maybe it's under the dash, the unit who has the coloured vacumm hoses??
http://www.s2central.net/S2_Schematics/A/A54.PDF
Any ideas about the problem??
P.D:Thanks s2central
I have a problem with an old 3b climate, when you put the contact on, works, after 2 seconds die...no lights, nothing...if you put the contact off and on again, the same, 2 seconds working, the unit remember what you select the time before (if it was showing outside temp. starts again with outside temp.) and then nothing.
I test the fuses and with another display unit and the same
I take a look at the schematics and I don't know where is "J127", maybe it's under the dash, the unit who has the coloured vacumm hoses??
http://www.s2central.net/S2_Schematics/A/A54.PDF
Any ideas about the problem??
P.D:Thanks s2central
Comment