Announcement

Collapse
No announcement yet.

Project URQ 30v

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Project URQ 30v

    EI LINKKEJÄ SUOMEN FOORUMEILLE KIITOS!

    I know You thought it is a typo, but it ain't. Sorry:

    The original 10v lump is in the bin, and replaced with this:



    Basically the idea is to make this one to be real pro street, or café racer if You prefer.

    Spec list:

    URQ my1985, bought from estonia. Has had minor damage to the front and to the floor. Someone has hit the ditch pretty hard backwards, so there was little hammering with the floor. Surprisingly little rust was found.

    chassis mods (so far)

    -gutted
    -water blasted
    -rust fixed
    -60m of rollcage tubing
    -JLS Airjacks
    -Electric power steering
    -custom close ratio steering rack
    -rad at the boot





    Suspension:

    -Audisport early grB (perhaps?) version steel uprights
    -adjustable tailored bilsten shocks with remote reservoirs
    -Audisport CrMo wishbones
    -Powerflex bushings
    -Aurora bearings



    Brakes:

    -Alcon type B front
    -Alcon type H rear
    -Alcon 295x28 discs
    -tilton floor peral assy
    -alcon master cylinders
    -JLS brake lines
    -Ferodo pads



    transmission and driveline:

    -B5S4 six speed 01e tranny
    -Alcon twinplate clutch
    -custom CrMo driveshafts
    -Torsen rear diff



    Engine:

    -AGB from -99 S4
    -girdled, honed, bored, another time bored, examined, loved, ****ed, polished
    -H prof conrods
    -Ross pistons
    -Ati super damper
    -ARE drysump pump
    -ITB:s
    -twin CT 3b turbos
    -custom solid cams
    -arrow lifters
    -schrick valvesprings
    -tatech T32



    Fueling:

    -RCI fuel cell
    -AN lines all the way
    -Aeromotive belt driven master pump
    -Aeromotive electrical transfer pump
    -Aeromotive FPR
    -Aeromotive billet filters
    -12 injectors, staged

    Electrics:

    -Race technology dash2
    -Race technology DL1 datalog with G and GPS
    -Motec PDM15 power control

    Wheels and tires:

    -Compomotive magnesium racing wheels with unknown tires
    -Braid 8,5x15 wheels with michelin tires



    I pretty much have all the major parts here, so it is up to me how this proceeds.

    Looking forward to smell the exhaust at august-sept this year.

    Stay tuned and wish me luck. There is quite a lot to do

    http://promo.pp.fi/temp/urmas/

    Situation today is:

    Engine mounts to the engine side are done. Block counterpieces are cut, waiting to be welded on.
    Radiator shrouds done, radiator 90% done
    Seat brackets done
    Steering column done
    two airjacks installed
    pedal assy stand done
    Last edited by Jamo; 8 April 2011, 18:10.
    Everything less than 2 bar is considered to be naturally aspirated

  • #2
    Cool project!! What's the hp goal on this one? I got a feeling this is going to be a beast!
    Leif-Helge
    -91 S2 VEMS and Comp Turbo
    -12 B** 530XD Touring "S2 parts transporter, and daily driver"

    Comment


    • #3
      hardcore! Thats one hell of a "street" car

      Is the torsen diff out of a V8? Will it take the torque?
      Panthero Coupé quattro 20vt
      Indigo ABY coupé
      Imola B6 S4 Avant

      Comment


      • #4
        Nice looking project, out of interest do you know the colour of the car?

        Interested to see what its like once on the rims as its rare to find people wanting to change from stock.


        Sapphire cos running custom 2.8litre conversion,es cos rims,raven black leather interior and 500+ with the gas turned off.

        Audi s2 cooking on gas

        Comment


        • #5
          Hi to all.

          You can guess from my nick that I'll be the lucky owner of this car.

          Diff is from V8. Will it take the torque, we'll see. About hp goal: it started at 600hp and now I think four number figure could be achievable. There happens to be one NOS set also reserved for this

          Comment


          • #6
            Originally posted by UrQ30vT View Post
            There happens to be one NOS set also reserved for this
            Finally someone using nos, can you keep us updated how you get on with this


            Sapphire cos running custom 2.8litre conversion,es cos rims,raven black leather interior and 500+ with the gas turned off.

            Audi s2 cooking on gas

            Comment


            • #7
              Incredible build, cant wait to see this progress.

              Oh, and nice Fiat
              sigpic

              Comment


              • #8
                Very Cool. We just got done doing the same swap into a helios 83 URQ with K04s/01e/meth/exc. Keeps breaking driveshafts!!

                I'll have to load up some pictures.

                Hank
                1981 URQuattro with the TIAL GT35r.
                2007 Infinity g35

                Comment


                • #9
                  Brilliant! Can you come and build me a car too plz..
                  91 S2 coupé - RIP
                  98 S8 - Luxury barge

                  Comment


                  • #10
                    I want some of those ex-works style wishbones.....
                    Do you know where I can get some or if there is anyone willing to copy some for me.
                    Audi Nut!!!

                    Comment


                    • #11
                      Originally posted by Tonks4x4 View Post
                      I want some of those ex-works style wishbones.....
                      Do you know where I can get some or if there is anyone willing to copy some for me.
                      From what i can remember you need the up rights as well

                      This car will be awesome
                      Chef

                      Comment


                      • #12
                        Jees Repo... you don't like to do things by half huh ?

                        Another monster to be birthed in Finland then...

                        Lovin' the airjacks especially - always wanted a car with TOCA airjacks !
                        Paul Nugent
                        Webmaster http://S2central.net
                        Administrator http://S2forum.com

                        1994 S2 Coupe ABY - aka Project Lazarus
                        2001 A6 allroad 2.5TDi - family tank
                        2003 S4 Avant 4.2 V8 - daily burble

                        Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)

                        There are only 10 kinds of people that understand binary - those that do, and those that don't

                        Comment


                        • #13
                          hieno 'rojekti! one to follow

                          btw: do you have to modify the engine bay to fit the biturbo in? iirc this caused problems with other V6 in typ85 builds


                          Originally posted by repo View Post
                          EI LINKKEJÄ SUOMEN FOORUMEILLE KIITOS!
                          miksei?

                          Comment


                          • #14
                            Originally posted by PeteUr View Post
                            Nice looking project, out of interest do you know the colour of the car?

                            Interested to see what its like once on the rims as its rare to find people wanting to change from stock.
                            Silver/Grey from the pictures:

                            Last edited by Jamo; 8 April 2011, 18:12.

                            Comment


                            • #15
                              Amazing project! I dont think I have seen a more comprehensive cage in a quattro before!

                              If you want the tubular wishbones Brian have a look here:

                              http://www.s2forum.com/forum/showthr...ight=wishbones

                              Comment

                              Working...
                              X