My URS6 Plus Speck Saloon

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Vorsprung durch Technik
    replied
    Bit of an update. Due to the way the front of the car was looking due to a terrible previous paint job that had deteriorated further by crazing on the front wing tops i had no choice but to bite the bullet and get the bad bits rectified which were as it stood the whole front of the car and the rear bumper. This quickly once i was in the painters company up in Birmingham turned into, from me, exploring about getting the whole car done. Although the rest of the car looked good from 10ft away, every panel had some sort of paint chip, scratch or as in the case of the boot lid leading rear edge a nice little annoying dent. These defects bothered me so the decision was taken to paint the whole car except the roof.That will be done later with the extra paint they've mixed as part of the whole batch so i'll get a perfect match.



    So,.........I received these pics from the painters. Some bumper rectification due to the spider cracks in the paint.









    Resized_20180212_182736_zpsouxwnpky.jpeg?793.jpgResized_20180212_182803_zps8fpl6uzh.jpeg?581.jpg

    Old wings of ready for new.

    2018-03-27-PHOTO-00000009_zpsfbot3xbg.jpg


    fullsizeoutput_114d_zpsjrk6urol.jpeg?t=1522106189?846.jpg

    fullsizeoutput_1153_zpsibereyty.jpg
    fullsizeoutput_1154_zpskl4zo7du.jpg
    That's it for now unless i get anymore photos from them. The cars being flatted and polished ready for the refit of window frames trim etc etc and i should be able to pick her up in 9 days time fingers crossed.



    Last edited by Vorsprung durch Technik; 27 March 2018, 23:33.

    Leave a comment:


  • Bowie69
    replied
    Excellent, after 17 years I finally have a handbrake that works on 3 clicks, it is a slightly bizarre experience

    Leave a comment:


  • Henkjan
    replied

    Leave a comment:


  • Vorsprung durch Technik
    replied
    Just a wee update, she has a new mot certificate a couple weeks ago so very pleased after too long a lay up and before any bright spark checks the mot history it's actually a little out! Ive covered 116 since the last MOT and not the 16 he's put down.


    Decided to completely rebuild the rear brakes so it matches the newly rebuilt subframes and suspension to come. Callipers were sent of the Big Red for the Luxury rebuild. Discs didn't come like that so sprayed them with what Halfrauds call Very High Temperature Paint which works very well so far. It's so nice to have a perfect handbrake again only 3 clicks to fully tight. Happy days.


    fullsizeoutput_f8b_zpshw0jfhbx.jpeg

    P1070370_zpskilbfvp8.jpg?776.jpg


    Wheels all washed clayed and polished up.


    P1070372_zpssvifguzs.jpg?591.jpg



    I'm loving driving her again to be honest.



    Leave a comment:


  • Vorsprung durch Technik
    replied
    Thanks Guys!!

    Leave a comment:


  • andy10v
    replied
    23 N 90355902 socket head bolt with hexagon socket head (combination) M8X30

    25 N 0147135 socket head bolt with hexagon socket head M8X35



    Dave has a load of info on the exhaust manifold studs here

    The Audi Enthusiast website. Forums for all Audis including A4, S4, A5, S5, A6, S6, allroad, A8, S8, TT, R8, Q5, Q7, 4000, 100, 200, v6, v8, vintage, local forums

    Leave a comment:


  • newsh
    replied
    IM fits with allen bolts, you can re-use them.

    Leave a comment:


  • newsh
    replied
    You can use normal 20v studs and shorten as needed although IIRC the Wagner doesn't actually need short ones? I know the Wagner was way easier to fit than the RS2 manifold, all the nuts are much easier to get to.

    Leave a comment:


  • macspring
    replied
    Presumably a set of RS2 exhaust studs should be the ones you'll need ?

    Others will know more though.





    Leave a comment:


  • Vorsprung durch Technik
    replied
    Fingers crossed i've got some time to get on with this.

    I can't seam to find the part numbers for the inlet and exhaust studs i need. I need standard for the AAN IM but will need the shorter exhaust stud for the wagner manifold i believe manifold pictured below. Any suggestions on spec,type and where's best to buy them? Cheers.



    Leave a comment:


  • URSIMPO
    replied
    Originally posted by RoadRunneRAD
    U R mud dude
    Ur car is sick... Mine will never get close to yours

    Whats the current mileage?
    Your car is lovely. I'm almost a bit kind of jealous.

    Wrath's is too of course!

    Leave a comment:


  • RoadRunneRAD
    replied
    What can u tell me about mine?
    Attached Files

    Leave a comment:


  • RoadRunneRAD
    replied
    U R mud dude
    Ur car is sick... Mine will never get close to yours

    Whats the current mileage?

    Leave a comment:


  • Vorsprung durch Technik
    replied
    Originally posted by John.
    It's a nice ramp to be fair!
    Awesome place and car!

    Leave a comment:


  • John.
    replied
    Originally posted by Vorsprung durch Technik
    I knew you would bite! I've got a nice one of your car too on that ramp.

    It's a nice ramp to be fair!

    Leave a comment:

Working...