90 coupe quattro,
alfa romeo red, paint is great all over minus a few minor nicks and the fronends abuse by small pebbles..
body is perfect minus the drivers side fender which is dented...
Abt RS2 bumper, (small repairable crack in the front)
I have the outer blinkers, but not the inner ones..
European RS2 projector headlights,
RS2 hood w/ custom hood scoop
Shortened rear bumper,
93 aan 20vt with 90,000 mi..pressure tested...
without ecu and harness....
034efi intake manifold installed,
Sachs clutch mated to the stock 5 speed,
I have the 6 speed but it has a howlin bearing, I also have another 6 speed to swap the bearing from..
new timing belt,
new motormounts,
the motor is installed, but the wiring is untouched...
Cobra Racing Imola 2 GT seats
Sparco Ring steering wheel
Matching red wood trim
five-spoke Abt A11 17x8 wheels
Yokohama A520 235/40-17 tires
Mintex brake pads
Abt hollow antiroll bars
polyurethane bushings
koni shocks,
intrax springs,
misc parts...
2 porsche gt2 intercooler
abt muffler
034 efi IIa
this project has gone on too long for me....
I am not a very good mechanic and don?t have the motivation, time, nor funds to finish what has begun.....
The car was being built by a shop in california and they were lagging too much, so I thought I could do it myself....
That might be the case, but now I don?t even want to deal with it....
The car would have been great 4 years ago when I didn?t have a family, but times change......
So I am prepared to take losses as I know I won?t get nearly what I?ve put in.....
Here is what work and parts I know it needs.....
-Slight modification to the fuel rail to fit with the new intake manifold
-either a relocation of the powersteering pump to clear the throttle body, or an electric pump from an old mr2 would work....I already took out the stock one to put on the throttle body......then the alternator just needs a little bracket to be bolted and tensioned.
-exhaust turbo back minus the muffler
-endtanks welded onto the intercooler and plummed
-with the wiring, I don?t have the stock harness nor the computer....
the guy that was building the car still might have it so I might be able to get it....he got me the Iic since he couldn?t find it, but come to find out it is a Iia.....
that can be upgraded to a Iic and 034 can build a harness, then the stock computer and harness aren?t needed.....
-for looks it needs a new driver side fender and fiberglass repairing on the front bumper
-inside, the seat bracktes are mia so those will be needed for the seats,
the rear seat back is also missing,
the rest of the interior is quite good except for maybe a new center console, but it is still ok.....
that right there to my knowlege will get the car running and driving...
better someone else takes over rather than me lookin at it in the garage for who knows how long.........
i've got 20,000 into it, but i'll take 8,000........
I'm in arizona....
just pm me or email me at imaiami@aol.com.... see the pics and the original post at
alfa romeo red, paint is great all over minus a few minor nicks and the fronends abuse by small pebbles..
body is perfect minus the drivers side fender which is dented...
Abt RS2 bumper, (small repairable crack in the front)
I have the outer blinkers, but not the inner ones..
European RS2 projector headlights,
RS2 hood w/ custom hood scoop
Shortened rear bumper,
93 aan 20vt with 90,000 mi..pressure tested...
without ecu and harness....
034efi intake manifold installed,
Sachs clutch mated to the stock 5 speed,
I have the 6 speed but it has a howlin bearing, I also have another 6 speed to swap the bearing from..
new timing belt,
new motormounts,
the motor is installed, but the wiring is untouched...
Cobra Racing Imola 2 GT seats
Sparco Ring steering wheel
Matching red wood trim
five-spoke Abt A11 17x8 wheels
Yokohama A520 235/40-17 tires
Mintex brake pads
Abt hollow antiroll bars
polyurethane bushings
koni shocks,
intrax springs,
misc parts...
2 porsche gt2 intercooler
abt muffler
034 efi IIa
this project has gone on too long for me....
I am not a very good mechanic and don?t have the motivation, time, nor funds to finish what has begun.....
The car was being built by a shop in california and they were lagging too much, so I thought I could do it myself....
That might be the case, but now I don?t even want to deal with it....
The car would have been great 4 years ago when I didn?t have a family, but times change......
So I am prepared to take losses as I know I won?t get nearly what I?ve put in.....
Here is what work and parts I know it needs.....
-Slight modification to the fuel rail to fit with the new intake manifold
-either a relocation of the powersteering pump to clear the throttle body, or an electric pump from an old mr2 would work....I already took out the stock one to put on the throttle body......then the alternator just needs a little bracket to be bolted and tensioned.
-exhaust turbo back minus the muffler
-endtanks welded onto the intercooler and plummed
-with the wiring, I don?t have the stock harness nor the computer....
the guy that was building the car still might have it so I might be able to get it....he got me the Iic since he couldn?t find it, but come to find out it is a Iia.....
that can be upgraded to a Iic and 034 can build a harness, then the stock computer and harness aren?t needed.....
-for looks it needs a new driver side fender and fiberglass repairing on the front bumper
-inside, the seat bracktes are mia so those will be needed for the seats,
the rear seat back is also missing,
the rest of the interior is quite good except for maybe a new center console, but it is still ok.....
that right there to my knowlege will get the car running and driving...
better someone else takes over rather than me lookin at it in the garage for who knows how long.........
i've got 20,000 into it, but i'll take 8,000........
I'm in arizona....
just pm me or email me at imaiami@aol.com.... see the pics and the original post at
