1992 AUDI S2 Project - Keep it British with a twist.

[Error404]

No brake pad warning on these mate, its probably the low hydraulic pressure warning or sticky PAS fluid cap sensor

[Wizard-of-OD]

MAF connector?

Doubtful as it would be completely dead if that were the case or it would idle like garbage.
Update : Torn "Michelin Man" hose from Samco. Makes you wonder why overpay for something when a Taiwanese version is 1/10 the cost and does the same job.

[quattrostyle]

MAF connector?

[Wizard-of-OD]

Going to place an order tomorrow for (4) Compbrake units. Anyone in North America interested to save on shipping?

As usual could never leave good enough alone. Swapped in a MTM ECU I had and took it out for a spirited drive last night.
- Get in, brakes feel a little off , start it and the Brake Pad light comes in. Turn off ignition turn it back on . Light goes away
- Pull onto the highway and engine won't go above 4000 rpm's. Pull over open the hood to look for a boost leak (, couldn't find anything. Turn it back on drives normal , then as I am pulling into the shop it starts acting up again.
Could be the wastegate , could be the MAF (allthough it is brand new) or could be a torn hose somewhere.

Might be a good excuse on the tilting scale for SEM vs Motronic and the built motor.

[Wizard-of-OD]

Issam, who/where in Portland?

billzcat1.

besides the ugly wheels that make the car look like a wagon or a roller skate, (remember i dont sugar coat things) you need to fix that wheel location in the rear arch, buddy. too far forward.

You are one of the few guys in the northwest USA I actually still love
Will tackle the suspension this winter when I install the KW's and subsequent other bits and with the drop it and stiffening the rear it will align.

[speeding-g60]

Issam, who/where in Portland?

[quattrostyle]

Portland where? there are MANY Portlands in the USA.

Oregon

[speeding-g60]

besides the ugly wheels that make the car look like a wagon or a roller skate, (remember i dont sugar coat things) you need to fix that wheel location in the rear arch, buddy. too far forward.

[speeding-g60]

Portland where? there are MANY Portlands in the USA.

but yeah, it would appear as though growth is something we ALL do over time, with repect to dealing with others, the public, etc.

and FWIW the Compbrake units are good, and EASY to take out. really easy.

[Wizard-of-OD]

Portland you say huh must be something in the water there then

OCTOBER 7TH 2014:
My machinist had to leave work early tonight so decided to close the office @ 5.30 , turn off the phones and work the grave yard shift infront the CNC. Made a list of everything that needs attention in the S2 while the machine was running.

• Bulbs in both Passenger side & Driver side switches are blown
• Bulbs in rear view mirror adjuster is blown
• Oil pressure & Oil Temperature guage does not light up
• Rev counter white backing is flaking off
• Fog light switch is on in the cabin but fog lights don't work
• Right front indicator in the bumper does not come on. No power / signal to the connector
• Right window does not seal completely

So mostly teething issues that will require love once the dis assembly happens and most of maintenance parts I will acquire from Rusty and other S2forum members.
One thing I am looking for is a brand new / or used good lock system. I have 3 keys ....
1 for the trunk , 1 for the ignition and 1 for the door which has become a little annoying.

[quattrostyle]

One of the blocks accompanied me on my return from the Caribbean to Canada where I shipped it to an individual in Portland in exchange for work. I will admit that in my late teens / early 20's I was extremely naive and trusted people at face value. Shipped out parts without payment , shipped out parts in exchange for work , etc.

Portland you say huh must be something in the water there then

[Wizard-of-OD]

Suspension O Ring....

Thank You
Looks very solid to me.

[5cylinderman]

Suspension O Ring....

[Wizard-of-OD]

I like the CompBrake units, nice and solid and BTDT on few cars already.
Not to mention cheaper than the Mance units.

Loking forward to updates.

Cheers

Thanks Martin
Reference to the compbrake product:

AUDI S2, 80 ALLOY FRONT TOP MOUNTS FIXED (PAIR)

New and now fitted to over 50 Audi’s on the street and track, offering improved and enhanced performance. These where originally developed for the Audi works Racing Team and produced outstanding results. Offers complete freedom of movement and positive suspension location. Definitely a must for any cars with modified suspension, wheels and engines. These have been designed for the Competitive and Enthusiastic Driver. This is a new design offering a direct replacement bolt on unit, giving ultimate performance machined from Aerospace Specification Aluminium. This is a two piece Aluminium Billet machined Top Mount that replaces the weak version which is originally fitted. Fitted with a Goldman Race quality Bearing to withstand the pace and pressure. Aluminium Locking ring which is located underneath the bonnet. Sleeve nuts and rubber suspension comfort O-ring.

Description fits the bill and not a bad price @ 100 GBP. Does anyone have images of the rubber suspension o-ring?

Talking with a fellow enthusiast yesterday , he asked me my thoughts on the WR Aluminum block (specifically what happened with the 1st one I had) as I was on the lookout for one to have as a display motor for my 3B/AAN/ADU products. At one point in my life I actually owned 2 of these blocks and did not think that rare since I had 2. It just so happened at the time that I was in the right place at the right time and picked up a truck full of Audi 100/5000/UR parts from a gentlemen in need of money. It was a bargain looking back at it. I still have one of them but the block will need to be repaired as a piston was melted (no problem just put in new sleeves) and the threads for the head bolts were stripped. Simple helicoil job which I will eventually have JP do once he gets back on his feet.

One of the blocks accompanied me on my return from the Caribbean to Canada where I shipped it to an individual in Portland in exchange for work. I will admit that in my late teens / early 20's I was extremely naive and trusted people at face value. Shipped out parts without payment , shipped out parts in exchange for work , etc.

Since I joined the community back in 2003 , dealing with a few members both on here & motorgeek has sort of molded the way I deal with my customers both professionally and personally. This was the original thread on MG

http://www.motorgeek.com/viewtopic.php?f=1&t=137

Which the dofus ironically shipped my calipers to Corey (so it was ****ing all around).

Reading that thread today drummed up some emotions and I edited my post on motorgeek to reflect what actually happened. It was a reminder of why it is critical to just be HONEST with community members. Keep it above board and in writing and everyone will get along just fine.

Lessons learnt which can't be taught in school.

[ralleyquattro]

What are you doing for strut mounts? Going with camber plates ?
I had a set of the Mance mounts but after reading reviews on them that they did nothing for ride quality I decided to sell them. The car handles and drives like a truck , I feel EVERYTHING in the road which I love

I like the CompBrake units, nice and solid and BTDT on few cars already.
Not to mention cheaper than the Mance units.

Loking forward to updates.

Cheers