Announcement

Collapse
No announcement yet.

Sleeper S2 Avant +400HP

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    I've read about issues of premature coil pack failures with covers like that because of retained heat.

    Otherwise carry on, build is progressing very nicely.
    Find me on Instagram @pry4sno
    2010 Golf Sportwagen TDI /// Wifey Mobile
    1992 80q 20v /// Eventual AAN'd Winter Sled
    1990 Cq /// Project: Because Racecar

    Comment


    • #47
      Hey Jonas if you want I can alter the harness for free
      Panthero Coupé quattro 20vt
      Indigo ABY coupé
      Imola B6 S4 Avant

      Comment


      • #48
        Originally posted by PRY4SNO View Post
        I've read about issues of premature coil pack failures with covers like that because of retained heat.

        Otherwise carry on, build is progressing very nicely.
        I ran TFSI coils on my stage 3 2.7 biturbo and they have covers over them. I never had a coil pack fail for 30.000 km. I still think they can went heat with this valve cover, but anyway if one should die every 10.000 km then they will still last 3 years or something.
        Sleeper S2 Avant +450

        A6 Avant 2.7t Stage 3

        Audi S2 Coupe RS2'ed

        Comment


        • #49
          Originally posted by Error404 View Post
          Hey Jonas if you want I can alter the harness for free
          That would be great, could you PM me your address? Then I can get it shipped this weekend. And you can just ship it back with the oil cooler duct.
          Sleeper S2 Avant +450

          A6 Avant 2.7t Stage 3

          Audi S2 Coupe RS2'ed

          Comment


          • #50
            Yup
            Can't PM on my phone I'll send you my address when I get to work
            Panthero Coupé quattro 20vt
            Indigo ABY coupé
            Imola B6 S4 Avant

            Comment


            • #51
              That looks ace, was going to look for a 7A cover but now I'm thinking this

              Comment


              • #52
                Managed to get some work done today

                Small update:

                Have had some problems with the ignition lock and I bought a new one a while back.

                Got the old one out and It was cracked, so no wonder I had problems starting the car:


                However the new one I got from my audi dealer was also cracked, but I had to install it anyway. I'm hoping my dealer will give me a new one.


                Since the speedometer was out to change the ignition lock I also decided to install my RS2 speedometer. I was considering change the kilometers, but they are very close, so I think I will just live with the 35.000 km difference.




                The car have had a really bad radio connection, so took a look at the ariel and surprise surprise it was not connected properly.


                Installed a shark finn ariel instead, but I need some kinda adaptor between the radio wires:





                Got my weight stickers on the car, which are need because it is a van. Fine is 100£ so good that was sorted.


                And finally I bought a new S2 specific sticker for the fuse box, since it was missing.


                Sleeper S2 Avant +450

                A6 Avant 2.7t Stage 3

                Audi S2 Coupe RS2'ed

                Comment


                • #53
                  This car is a van???

                  Comment


                  • #54
                    Yup what we call a van in Denmark, No rear seats just a big trunk
                    Sleeper S2 Avant +450

                    A6 Avant 2.7t Stage 3

                    Audi S2 Coupe RS2'ed

                    Comment


                    • #55
                      yes, it's an avant

                      Comment


                      • #56
                        Oh so you have taken the rear seats out. Ok

                        Comment


                        • #57
                          it can be bit lower

                          Comment


                          • #58
                            Originally posted by Classix View Post
                            it can be bit lower
                            Agreed.

                            I have a set of 40/40 H&R lowering springs and bilstein dampners ready to go on when I get the time
                            Sleeper S2 Avant +450

                            A6 Avant 2.7t Stage 3

                            Audi S2 Coupe RS2'ed

                            Comment


                            • #59
                              it will be perfect when it down 1,5 sm

                              Comment


                              • #60
                                New rear tail lights

                                So I had some time today and managed to get my black hella tail lights installed.

                                I really think I need the 90 middle tail light but cant find a decent one.

                                Also previous owner had forgot to use the sticky sealing on one of the tail lights.

                                The part no. for 2,5m of the black sealing stuff is:
                                AKD 497 010 04 R10

                                Some installation pictures:







                                The finished results:


                                Sleeper S2 Avant +450

                                A6 Avant 2.7t Stage 3

                                Audi S2 Coupe RS2'ed

                                Comment

                                Working...
                                X