Refurbing Audi RS2

[ColonialNomad]

The wheel is pushed towards the rear of the arch.

[irishs2]

In what way/direction is it 10mm out?

[ColonialNomad]

Yeah the subframe was replaced and so were both forged wishbones. Definitely not something that is bolted on.

[Ross]

That's pretty weird - sorry to hear you're having issues getting the front end straightened.

Having messed with the front suspension on mine this past couple of weeks, it looks like you're most likely looking at a messed up subframe or bent wishbone. Having accidentally bent a pressed rear wishbone out of shape on mine, I know how easy that can be. Now replaced with forged items. But from a quick skim, you replaced the subframe and the wishbone is pretty recent?

If you still need fuel lines, and want OEM, I have a set of new ones in the garage I might be willing to part with. Will be more expensive than getting a new set made up those, but PM if you want to discuss.

[ColonialNomad]

Car comes back from coachworks and they couldn't set the drivers side wheel straight. Despite pulling the front end 12 mm forward and installing a new front sub frame, the wheel is still 10mm out.

I'm incredibly disappointed...not with them though, they waived the bill - bless them.

What are my options?

[newsh]

PM replied

[ColonialNomad]

Oh dear..

If you need a specialist in the south east who knows what he's doing then PM me.

PM'd!

Take it to Quatttro Coachworks. Get it back better than new. Done.

Unfortunately it's going to take a whole Saturday to get the car to Luton and get back on the train. Also, with the subframe working itself loose all the time with every traffic signal and speed bump, it would probably be safer to travel somewhere closer to get the subframe replaced.

[Error404]

Take it to Quatttro Coachworks. Get it back better than new. Done.

[newsh]

Oh dear..

If you need a specialist in the south east who knows what he's doing then PM me.

[ColonialNomad]

Got the car back and discovered someone had also pranged the back bumper while in the care of the coachworks. FFS, will I ever win with this car...?!

[ColonialNomad]

Off to retrieve the Audi today. The coachworks found that the previous mechanic had used the wrong bolts on the wishbones and they were on the verge of coming off the car when I dropped it off last week. Also the front subframe came loose again because it hadn't been tightened up with car off the lift. The chassis has been straightened but the front subframe needs replacing as it's kinked.

[ColonialNomad]

It sits on the front of the main rad:

Wow, that is a scrupulously clean engine bay.

[UrS4boy]

It sits on the front of the main rad:

Thanks Error. NOW I know why I never saw the RS2 (and probably S2) A/C condenser before, it was under the OE radiator cover/duct.

[Error404]

It sits on the front of the main rad:

[UrS4boy]

Hmm...I did NOT know that. I need to check my photo archives (can't walk down the street here and check a neighbour's RS2 (only 2 in "town" of 2.5 million folks in Greater Vancouver).

Just checked my RS2 photos and found that what I thought was the R134a condenser was the auxiliary extra radiator. On that basis, I just I have NEVER actually seen an RS2 A/C condenser, presumably it is behind the extra radiator? Kate, my friendly parts person, isn't much help regarding the location but she does show a bumpy A/C condenser (standing vertically??)