Announcement

Collapse
No announcement yet.

Small Urs6 project!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • maiks
    started a topic Small Urs6 project!

    Small Urs6 project!

    Hello guys!
    I'm pretty new here. I bought the urs6, 2.2T almost a year ago and since then I have had a lot of problems with that - gas leaks, lots of air leaks, brakes were stuck and many more. I have got a lot of help here, thats why I am doing my own thread, maybe it will help someone somehow.




    Attached Files
    Last edited by maiks; 28th August 2015, 07:58.

  • maiks
    replied
    Originally posted by ringbearer View Post
    Now that’s an open wastegate!
    There was some serious sound coming out of it.
    Didn't take a lot of time to figure out that something was wrong.

    Leave a comment:


  • maiks
    replied
    Originally posted by s0_big View Post
    Well that´s not good.. Hopfully no damage to the rest.
    No damage for the rest. Only my own time was damaged.. Again I needed to pull everything off and put all back together. There was probably bad welding fault, now should be ok. It needs to hold a hell of the heat, so I don't tape it anymore. Maybe it's better this way.

    https://www.youtube.com/watch?v=6WlaVaGe2NE

    Leave a comment:


  • ringbearer
    replied
    Now that’s an open wastegate!

    Leave a comment:


  • s0_big
    replied
    Well that´s not good.. Hopfully no damage to the rest.

    Leave a comment:


  • maiks
    replied
    Wastegate fllew away. Found also a few cracks. All back together. Hopefully no issues with it anymore.

    Leave a comment:


  • maiks
    replied
    Originally posted by vcosmin View Post
    What s200sxe is this ? the larger one ?
    Yes larger one.

    Leave a comment:


  • vcosmin
    replied
    What s200sxe is this ? the larger one ?

    Leave a comment:


  • Thuppu
    replied
    Ok, nice. I think this could be next turbo for my B4 if the previous one dies.

    Leave a comment:


  • maiks
    replied
    Thanks. I used this - https://www.turbozentrum.de/Turbine-...lescroll-063ar
    Originally no turbine housing Bought it separately. I also use water-methanol injection, it helps a lot. On the dyno day car drank it 5-6 liters

    Leave a comment:


  • Thuppu
    replied
    Aa, this was yours with S200SX-E... Very noce result! You have .63 turbine housing. It is custom machined to fit? What housing is it orginally?

    Leave a comment:


  • maiks
    replied
    Prj mapped. Dyno.png

    Leave a comment:


  • maiks
    replied
    https://www.youtube.com/watch?v=XmxHkla8Ta0

    Leave a comment:


  • maiks
    replied
    New turbo, downpipe, exhaust etc.sumps.JPGDownpipe.jpgkaalikas.JPGtermostaat.JPGtermostaadi korpus.JPGtermostaat 2.JPGtermostaat 1.JPGaltitude sensor 1.JPG

    Leave a comment:


  • maiks
    replied
    Tested car's abilities... I really need to change the gearbox.. I have diesel one... I put 5th gear at 250km/h... I have 6 gears

    Leave a comment:

Working...
X