I am putting a 95 8C5 S2 back together and the brake pipe are giving me nightmares as the ones on the car looked like they were made by a 3 year old so I can't copy them, I have worked out most using the specs on ETKA such as the on the struts and rear arms plus the front to back but the bulkhead lines are awful and the one over the rear diff crossmember... well! I know what the length should be, not the shape. What I could do with is an engine out bulkhead shot of some originals and if possible an idea of what the rear over the diff one looks like as it has been a good decade since I did any on an S2.