urS4 rear pad height / swept radius

[Error404]

Cool, just what I needed thanks guys

[UrS4boy]

Pads have about 42mm of friction material and the annulus is about 46mm. It does depend upon who manufactures the stuff though!

So 45 mm wasn't a hugely bad guess (from memory and holding my fingers apart and estimating)

[twoqu]

Pads have about 42mm of friction material and the annulus is about 46mm. It does depend upon who manufactures the stuff though!

[UrS4boy]

Can anyone tell me the rear pad height / swept radii for the urS4/6 rear brakes? Cheers Alex

Well the rotor is 269 mm in diameter and all but maybe 2 mm at the outer edge is swept. The pad width is about (from memory) 45 mm wide (maybe 50) (I don't have an old set of pads to measure but could, if forced, go try to measure the ones on my UrS4).

[Error404]

Can anyone tell me the rear pad height / swept radii for the urS4/6 rear brakes?

Cheers
Alex