Upgrades to Audi key

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • johne
    replied
    Impressive

    The LED will do the AC to DC conversion for you and the little 3 legged semiconductor hidden in the corner to do the switching.

    I think I'd have gone the use a lithium coin cell replacement to get the 3 volts or even two 1.5 volt silver cells in series as the easier option...........that said my key fob, battery and bulb are 15 years old, all original and still working fine.

    John

    Leave a comment:


  • HPmuirt
    replied
    Originally posted by cab9fab
    Very nice!...but I am a bit confused...you must at least be switching somewhere to create di/dt and interact with the inductor, yes?
    Yup, it is indeed switched, you just cannot see that very well with the poor picture taken on my phone.

    So whilst Einstein might be spinning in his grave, Ohm would not be

    Cheers n

    Si

    Leave a comment:


  • Wheeljack
    replied
    Very nice!...but I am a bit confused...you must at least be switching somewhere to create di/dt and interact with the inductor, yes?

    Leave a comment:


  • HPmuirt
    replied
    Originally posted by maddagent
    Make that 3! that step up transformer squeezed into the key is just excellent. I really love things like that. Top Top job. To some it may just be a light on a key but that real problem solving right there!!!
    Cheers matey

    9,475 to go

    Cheers n

    Si

    Leave a comment:


  • maddagent
    replied
    Make that 3! that step up transformer squeezed into the key is just excellent. I really love things like that. Top Top job. To some it may just be a light on a key but that real problem solving right there!!!

    Leave a comment:


  • HPmuirt
    replied
    Originally posted by newsh
    I am totally impressed, how did you make the DC into AC?
    Why thankee, that's 2 impressed, just another 9,476 members to go (I've given up on Fatty )

    All DC by the way matey

    Cheers n

    Si

    Leave a comment:


  • newsh
    replied
    I am totally impressed, how did you make the DC into AC?

    Leave a comment:


  • HPmuirt
    replied
    Originally posted by Sonic
    Suitably impressed
    Thanks Andy, I am glad finally someone is impressed (unlike Fatty who wouldn't recognise genious even if/when I run over his foot with my Coupe ) as I was rather chuffed with my work.

    Cheers n

    Si

    Leave a comment:


  • Sonic
    replied
    Suitably impressed

    Leave a comment:


  • HPmuirt
    replied
    Originally posted by Sonic
    Step-up transformer? Anything less and i wont be impressed, Si
    So, impressed Sonic?

    Cheers n

    Si

    Leave a comment:


  • HPmuirt
    replied
    Originally posted by Error404
    I'm sure that Skull is using a flip-key on his Compi
    I think he has, but has he managed to sqeeze the Scorpion 918 alarm fob into it as well?

    Image of key transformer solution now added to post above

    Cheers n

    Si

    Leave a comment:


  • Error404
    replied
    I'm sure that Skull is using a flip-key on his Compi

    Leave a comment:


  • HPmuirt
    replied
    Originally posted by KaraK
    He's sourcing the remaining 1.5V from Einstein spinning in his grave


    Originally posted by Sonic
    Step-up transformer? Anything less and i wont be impressed, Si
    You think I can make a step-up transformer in the key?......are you mad?......



    ....Damn - spot on

    Key 4.jpg
    Voila - a tiny transformer

    Cheers n

    Si
    Last edited by HPmuirt; 14 July 2011, 13:06.

    Leave a comment:


  • KaraK
    replied
    Originally posted by newsh
    How are you running a 3V LED on a single 1.5V battery?
    He's sourcing the remaining 1.5V from Einstein spinning in his grave

    Leave a comment:


  • Dan
    replied
    Originally posted by HPmuirt
    What surprises me, is that no one asked how I am running a 3V LED on a single 1.5V battery :mischeif:

    Leave a comment:

Working...