AAN & ABY specific differences

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • K Simmonds
    replied
    Originally posted by pfi
    mby move the last posts to a new thread ?
    doesn't belong in a sticky...
    Good suggestion.

    Leave a comment:


  • pfi
    replied
    mby move the last posts to a new thread ?
    doesn't belong in a sticky...

    Leave a comment:


  • Tractor Dave
    replied
    I'm just the other side of Carmarthen, near Whitland

    The Audi 80 (red front) Haynes manual covers the 20v 7a engine which is very similar.

    Leave a comment:


  • K Simmonds
    replied
    I have the factory manual that covers the 7A engine which is the non turbo variant of ABY/AAN/ADU and 3B/RR engine's which will give you the head bolt torques and tightening sequence as they're the same but it doesn't cover any of the turbo stuff.

    I'm sure there must be a guide on here regarding changing the head gasket, I'll have a poke around later and see if I can find anything for you.

    Llanelli isn't too far from me, I'm near Brecon.

    Leave a comment:


  • Pug
    replied
    Llanelli

    Leave a comment:


  • Pug
    replied
    It is Audi 80 S2 Avant engine aby 2.2 1994
    got head gasket failure would like material on rebuild manual for engine
    You do not have permission to view this gallery.
    This gallery has 3 photos.

    Leave a comment:


  • Tractor Dave
    replied
    And where in Wales are you? A few of us in Wales

    Leave a comment:


  • K Simmonds
    replied
    Hi Pug and welcome to the Forum, you've not really posted this request for info in the correct section but that's understandable if your still finding your way around the site.

    What info are your after in-particular? Some more details regarding your car would also be useful, ie is it stock and what sort of mileage has it covered?

    They're not especially difficult to do a head gasket on though it is a time consuming job and not one I'd entrust to a random garage, if you're doing the work yourself so much the better.

    Leave a comment:


  • Pug
    replied
    Can you help I have Audi 80 S2 Avant 2.2 engine code aby 1994 I have head gasket failure I need information on rebuild
    many thanks
    Pug

    Leave a comment:


  • HMS-S6
    replied
    Ok i'll admit it, i'm a self confessed geek!!

    How many engine codes were there for the inline 5 audi engines, and what are the pro's and con's of each? Mine is a late AAN. Does it mean i have some good bits when it comes to tuning later?

    Leave a comment:


  • Audi-Porsche Avant RS2
    replied
    Thanks a lot Paul, where can I find Audi code on the block?
    Thanks!
    Bye

    Alessio

    Leave a comment:


  • S2central.net
    replied
    AAN block should carry number 034 100 105 C

    ABY and ADU have some block number but replace 'C' with 'S'

    for 3B - we have same again except ending in 'D'

    From memory - the 3B and AAN share same setup for timing belt tensioner, but I'd need to check for sure.

    Leave a comment:


  • Audi-Porsche Avant RS2
    replied
    Hello, how is possible to check if the motor block is a AAN, ABY or a ADU?
    Thanks a lot!
    Bye

    Alessio

    Leave a comment:


  • S2central.net
    replied
    Dangit - what is wrong with my head - I was sure the ATP thing pointed me at the KW engine... Maybe I got excited with the reference to 'AQS' which covers the S1 and the ordinary UR... My bad - sorry... It is of course the RR engine I should have referred to.


    Paul

    Leave a comment:


  • 4WheelDrifter
    replied
    Originally posted by S2central.net
    Been looking at the family album again... The head 034 103 351 N is common across the 3B/AAN/ABY/ADU and even the mighty KW (S1 Engine)
    I think you mean RR not KW. The Sport quattro used a different head.

    Leave a comment:

Working...