Standard car + vag-com anyone??

[HMS-S6]

Ah right I see. Thanks mate!

[newsh]

ABY but running logging software not Vagcom.

[HMS-S6]

What group did you read it in? Is yours a 3b?

[newsh]

That I would have to ask Dmitri.

[HMS-S6]

Sorry bud.

My coupe with GT3071, Wagner kit, + PRJ chipset, not yet final tune.

Fully spooled 3rd gear, 3480RPM , Load 197, AFR 11.4.

Thank you bud. Really appreciate that. Was the load from group 000 or 003 as a percentage?

[newsh]

The replys are overwhelming.

Sorry bud.

My coupe with GT3071, Wagner kit, + PRJ chipset, not yet final tune.

Fully spooled 3rd gear, 3480RPM , Load 197, AFR 11.4.

[HMS-S6]

The replys are overwhelming.

[HMS-S6]

Failing this, has anyone got a car in Leicester, Derby or Nottingham area I can use my vag-com on?

[HMS-S6]

I missed these responses. God knows how!!
It's have to have the N75 connected to calculate the load correctly.
It's group 000 window two and three and I think it'd group 003 with load expresses as a percentage.

Not a great comparison I know but I just had a 2008 Golf GTI in and at WOT at 3,500 it has 191% load. A million miles different to my 111%

[newsh]

Along with group 000, which other groups do you want in the log?

[newsh]

I dont have my Avant at the mo sorry. I could do a log on the Coupe which is running chipped RS2 spec (but with a GT3071 and full Wagner kit). I'm a bit scared to give it WOT to be fair, I guess I could disconnect the WGFV.

[Monkeymagic]

I'm in Finland at the no. When I get back I will look at figures for you.

[HMS-S6]

I'm really struggling without this guys! Even a log of the load on a homefied car would be a MASSIVE help to me!

[HMS-S6]

No no. The 130 is the figure for load in group 000. In group 003 it's expressed as a percentage which is lower.

[twoqu]

Isn't this load figure getting lower since the new maf? I though it was up to the mid 130's now its down to 110's!