RS2 intake vacuum fitting part number

[newsh]

Actually not too bad if you zoom in.

[newsh]

If you could read it..

[s2driveruk]

good find

[qmulus]

I found this blueprint of the actual part (034 133 347). I have no idea where it came from as I found it years ago. Perhaps it will help if someone would like to have some made.

Steve

[carboRS2]

http://trshop.audi.de/konakart/Selec...ZEN&model=0001


No idea on details of this but it does have threads on one end and barbed on the other.

That seems to be the right part.
I finally solved it with the tractor part advised some posts earlier. It's a little longer but when the tube is fitted there's no difference.

At least this can be useful for future users. Thanks.

[ThatGUY]

http://trshop.audi.de/konakart/SelectProd.do?prodId=12269&manufacturer=manufacturer&category=Motor%2C+Kupplung&name=SCHRAUBSTUTZEN&model=0001

No idea on details of this but it does have threads on one end and barbed on the other.

[Wheeljack]

And I did not see it mentioned, but an ABY manifold will also have the same nipple. BTDT. Just some additional FIY...

[carboRS2]

job done

http://www.malpasonline.co.uk/ItemDe...okiesEnabled=1

FINALLY!
This part fits perfectly and has the same or best quality than Audi oem.

Thanks a lot Error!

[carboRS2]

Confirmed!

That's not the rigth part despite what Audi Tradition said...
Damn it!

[carboRS2]

I hate to burst your bubble, but 034 145 779 D is the vacuum fitting on the cold side of the turbo that connects it to the WGFV. It is not the correct size unfortunately. However, please post back when your part arrives to descibe what you have.

This is 034 145 779D part I just picked up from the dealer. Still haven't fitted to the car but it seems the right one to me.

[madpugger]

I missed these

That would be great Mike. Let me know what you want for it.


Jonas, yes it is M8 to 3.5 ID vacuum line(I think).

M8 is the size. Please post your findings here.

Thank you for looking into possible solutions!

Just a beer dude

[Ruffiano]

... just looking on the interwebs, i realized that the 3b doesnt have that front nipple... nevermind!

[Error404]

job done

http://www.malpasonline.co.uk/ItemDe...okiesEnabled=1

[Ruffiano]

isn't the 3b manifold one the same? i have one i could get you, stateside too!

[saltinot]

I missed these

Tom remind me before le mans. I'll take one with me for you.

That would be great Mike. Let me know what you want for it.

Tom I have some contact for a firm in Denmark that sells all kinds fittings for cars.

I'm sure he has something, I could ship it with the other parts if you like?

But just to clarify, it needs to be M8 thread? and then what size hose does it need to fit?

Jonas, yes it is M8 to 3.5 ID vacuum line(I think).

So the thread size is M8? I'm almost sure we got some here in our local shop, I can ask alround. Fitted this to my Comp, threadsize it 1/8NPT though...

M8 is the size. Please post your findings here.

Thank you for looking into possible solutions!