dashboard lights

[Pirvu Eugen]

here you go, buy them and never again worry about `em...

http://www.ebay.de/itm/10-x-ROT-B8-5...item5d593d28c0

200 euro for 10 leds? or something is wrong in my computer?

[Skull]

It is difficult to capture the true color, they are not as bright as in the pictures, it is just perfect, you can't go wrong...

They are still adjustable, but just a little bit, but like said, they are perfect the way they are...

[Steady]

I also bought LED:s Sküll recommended and must say that I'm pretty happy with them.
These are obviously china quality so in my case one LED did not work at all and one is much dimmer than others.

I attached couple of bad cellphone pictures. Left is before, right is after. I hope someone finds these useful. I still haven't changed these two faulty LEDS so "After" picture isn't final

Those look quite bright, at least on those pictures. I have my dash lights turn down low. Are they still hooked up to the adjusted knob?

[popdemonic]

after i have read this thread i need some more motivation to pull off my cluster and lighthen all the things up again lol.
one bulb on my cluster is out quite a big while.

[UrS4boy]

hey! Your boost gauge marks 2.6 for a while!

Remember that the trip computer boost gauge is absolute pressure, not relative and that it was calibrated to a 250 kPa MAP sensor. On that basis, 2.6 Bar = about 1.58 Bar (23 psig) boost, which is about right for a chipped car.

[Giacomo]

found a video

https://www.youtube.com/watch?v=h_1M...skbzAt4tKj4Isw

hey! Your boost gauge marks 2.6 for a while!

[RAOUL]

Thank you Skull. Ordering now!

[Skull]

here you go, buy them and never again worry about `em...

http://www.ebay.de/itm/10-x-ROT-B8-5...item5d593d28c0

[RAOUL]

Red Led's

Hi Skull, are these still available? Can you repost a link please if they are? I've purchased 10 1.2w standard bulbs but I'm now wondering if I'll burn something out, anyone else done the standard higher wattage upgrade?

Cheers.

[curlyks2]

Hi guys, sorry for jumping this thread... But could someone tell me/point me to a thread that details how to remove the cluster as I want to renew all the bulbs?

Available here under Technical Data / Electrical Systems / Instruments & Cluster / Removing the cluster

[GrantGam]

Hi guys, sorry for jumping this thread... But could someone tell me/point me to a thread that details how to remove the cluster as I want to renew all the bulbs?

[JayEll]

Yes I know I have another set of those LED:s at home, just need time and motivation..

[Skull]

never had a faulty led from them before... i think you know you have to turn them the right way around for them to work?

[JayEll]

I also bought LED:s Sküll recommended and must say that I'm pretty happy with them.
These are obviously china quality so in my case one LED did not work at all and one is much dimmer than others.

I attached couple of bad cellphone pictures. Left is before, right is after. I hope someone finds these useful. I still haven't changed these two faulty LEDS so "After" picture isn't final

[newsh]

im glad somebody followed my advice

I bought some too but haven't fitted them yet as I have plasma in the coupe and the avany is on loan