RS2 accelerator pedal rubber

[ped]

Thanks, yes mine is RHD. I'll have to investigate further; as you say I'm sure I can pop off the surface and mount a new plate.

[gag4o]

its like 35 Euro in tradition shop. I just replace my pedal.
Press the "teeth" behind the mounting with one hand and pry off from the bottom with screwdriver. Then pry off the gas cable on the top. Put the new one in reverse . Like 2 minute job
Are your original pedals with Audi logo on them? if so the plain non-logo pedal will be exact same but just newer style for late cabriolets.. no other difference. Also you can buy the brake and clutch pad for couple euro with no logo on them.

By the way the right hand drive cars have different gas pedal.. dont know where you will find it...

[ped]

Thanks for that. Yes I think I may have to replace it.

[UrS4boy]

Potentially it might not be rubber I guess but I'm pretty sure my gas pedal should have something more on it. I'll take a pic

There is no separate rubber. It is the whole pedal unit, PN 8G1721507A. Common to B3s and B4s

Click on the (i) icon beside the item 1 PNs to find the other cars the pedal was on:
http://audi.7zap.com/en/rdw/audi+80+.../721-721060/#1

http://shop.audi-zentrum-goettingen.de/index.php?page=product&info=2305

http://www.ebay.de/itm/Original-Audi...-/140766726064

[ped]

Potentially it might not be rubber I guess but I'm pretty sure my gas pedal should have something more on it. I'll take a pic

[ped]

Anyone know where I can get something? I assume it's the same as Audi 80 type?