Originally posted by filip.krticka
View Post
Announcement
Collapse
No announcement yet.
Exchange of experience setting m.2.3.2 for beginners.
Collapse
X
-
Originally posted by Rysiek View PostHello, Can anyone share PRJ mod BIN files for setup like RS2 + or k26hybrid or something similar I need something between Stock BIN and BIG turbo to compare in order to learn how to corectly tune my car. My setup is K24 7400 turbo.
Leave a comment:
-
Hello, Can anyone share PRJ mod BIN files for setup like RS2 + or k26hybrid or something similar I need something between Stock BIN and BIG turbo to compare in order to learn how to corectly tune my car. My setup is K24 7400 turbo.
- 1 like
Leave a comment:
-
Guys, have you noticed a difference in engine operation parameters on the same firmware but different ECUs? I set up and drove the ecu 551B, now installed the same firmware on the ECU 551AA and saw a richer mixture.
Leave a comment:
-
What is the safe option for decap patch?
patched or patch removed?
Thanks
Leave a comment:
-
Guys, how to connect innovate lc-2 with Winlog? Did someone do this via the usb port using the lc-2 digital output?
Leave a comment:
-
I want to express my deep gratitude to vwnut8392, the corrected code works well! There was a problem on my car: when the AC is turned on, the speed does not increase to the values indicated on the map, but when the climate turns on for heating, the speed increases. On another car, everything works as it should. I think the problem is in the climate control unit.Last edited by jonn48; 24 July 2019, 11:45.
- 1 like
Leave a comment:
-
[QUOTE = vwnut8392; n2064875]
[ATTACH] n2064876 [/ ATTACH]
Преобразование для RPM: X * 10
[ATTACH = JSON] {"data-align": "none", "data-size": "medium", "data -attachmentid ": 2064877} [/ ATTACH]
[/ QUOTE]
Большое спасибо! Утром я внес поправку в xdf, вечером постараюсь написать в ecu.
Leave a comment:
-
Originally posted by jonn48 View Post
I will be very grateful!
If it doesn't bother you, check the LC code to see if its operation is normal.
27c512.zip
1.4.6_(BIGTURBO) AC fix.zip
Conversion for RPM is X*10
idle control.JPG
Leave a comment:
-
Originally posted by vwnut8392 View Postit works fine. post up your motor chip and i will patch it for you with this.
If it doesn't bother you, check the LC code to see if its operation is normal.
27c512.zipAttached FilesLast edited by jonn48; 21 July 2019, 17:38.
Leave a comment:
-
Originally posted by jonn48 View PostLet me know if this method works on the car. Unfortunately, I do not know how to work with the disassembler, so I can only watch. Still, it's interesting why the rs2 code doesn't work as it should.
Leave a comment:
-
Originally posted by vwnut8392 View Post
the removal of R660 should not affect it. bosch tends to ground unused ADC inputs from the factory instead of letting them float as open pins. just fixed the AC in my S6 finally and now that i read this thread its really bothering me that the AC control part of the code isnt working right lol.
i have an idea of using the old automatic in gear target idle RPM table as a table for target idle RPM when AC is on. i didnt test this yet but i think it will work, this is what i changed below.
Code:ROM:455E ROM_455E: ; CODE XREF: ROM_44F1:ROM_4557↑j ROM:455E ljmp ROM_7FA0 ; Long Jump
Code:ROM:7FA0 ROM:7FA0 ROM_7FA0: ; CODE XREF: ROM_44F1:ROM_455E↑j ROM:7FA0 jnb RAM_20.6, ROM_7FA8 ; Jump if Bit is clear ROM:7FA3 mov R2, #2 ; Move (Op1 <- Op2) ROM:7FA5 ljmp ROM_4565 ; Long Jump ROM:7FA8 ; --------------------------------------------------------------------------- ROM:7FA8 ROM:7FA8 ROM_7FA8: ; CODE XREF: ROM_44F1:ROM_7FA0↑j ROM:7FA8 mov R2, #3 ; Move (Op1 <- Op2) ROM:7FAA ljmp ROM_4565 ; Long Jump
Code:code:00004569 80 0D sjmp code_4578 ; Short jump
Leave a comment:
-
Originally posted by jonn48 View PostFor some reason, on the original rs2 chip, there is also no increase in speed and a no switch to the "idle isv linearization AC on." I see it in trace mode with emulator in tuner pro. Could the removal of R660 somehow influence this?
i have an idea of using the old automatic in gear target idle RPM table as a table for target idle RPM when AC is on. i didnt test this yet but i think it will work, this is what i changed below.
Code:ROM:455E ROM_455E: ; CODE XREF: ROM_44F1:ROM_4557↑j ROM:455E ljmp ROM_7FA0 ; Long Jump
Code:ROM:7FA0 ROM:7FA0 ROM_7FA0: ; CODE XREF: ROM_44F1:ROM_455E↑j ROM:7FA0 jnb RAM_20.6, ROM_7FA8 ; Jump if Bit is clear ROM:7FA3 mov R2, #2 ; Move (Op1 <- Op2) ROM:7FA5 ljmp ROM_4565 ; Long Jump ROM:7FA8 ; --------------------------------------------------------------------------- ROM:7FA8 ROM:7FA8 ROM_7FA8: ; CODE XREF: ROM_44F1:ROM_7FA0↑j ROM:7FA8 mov R2, #3 ; Move (Op1 <- Op2) ROM:7FAA ljmp ROM_4565 ; Long Jump
Code:code:00004569 80 0D sjmp code_4578 ; Short jump
Last edited by vwnut8392; 20 July 2019, 08:10.
Leave a comment:
Leave a comment: