Top mounts

[Timo]

I'm also interested.

[Classix]

https://www.s2forum.com/forum/techni...-iv-a-new-hope


This reminds me to pull my finger out and finish machining the moulding tools in order to make these poly bushes.....

If you can wait a few weeks I will be able to supply a plug & play solution.

What will be the price?

[booested4door]

will these fit konis? im running the 2 bennett kit in my b2.......

[rynaqui]

Count me in too Alex!

[flat out 90]

That’s cool Alex I’ll wait no problem at all they look well cool

[Monkeymagic]

As soon as you do put me down for an order Alex!!

[Filip_FIN]

https://www.s2forum.com/forum/techni...-iv-a-new-hope


This reminds me to pull my finger out and finish machining the moulding tools in order to make these poly bushes.....

If you can wait a few weeks I will be able to supply a plug & play solution.

THIS sounds very good 8)

[Error404]

mine do...... whatcha got?

https://www.s2forum.com/forum/techni...-iv-a-new-hope


This reminds me to pull my finger out and finish machining the moulding tools in order to make these poly bushes.....

If you can wait a few weeks I will be able to supply a plug & play solution.

[Lago Blue]

PM sent to Mr. Bambridge.

[booested4door]

If your top spring perch / spring collar floats on the shock shaft then I have a solution for you. Do you have any pics of your coilovers?

Alex

mine do...... whatcha got?

[flat out 90]

I don’t but they are bambridge coilovers kits I’ll try and he’s some photos

[Error404]

If your top spring perch / spring collar floats on the shock shaft then I have a solution for you. Do you have any pics of your coilovers?

Alex

[flat out 90]

hi yes they are the correct way up ill try and get a photo in the morning

[steve briance]

not intending to insult but are they the correct way up? It is possible to put them on upside down and then they will fail very quickly. Even the cheapest after market items should last longer than 300miles.

Picture of installation?

[Lago Blue]

Flat Out,

If your set-up should use a mount of strictly OEM dimensions, perhaps these would be suitable?