Hey folks!
I've been searching around a bit, but haven't managed to find the answer..
I own an Audi 90 quattro limo with the 7A engine. Unfortunately, it's quite rusty underneath (beyond sandblasting), so I'm looking for some replacement parts.
The front suspension struts on the limo is 50mm wide, while the coupe is running 45mm.
I've found a decent set of coupe struts on ebay for a reasonable price, so I'm wondering if it's possible to make the switch, or if there's too much trickle-down work from making the switch
edit: those are the ones I'm looking at: http://www.ebay.de/itm/Federbeine-Au...item5d54d577b6
I've been searching around a bit, but haven't managed to find the answer..
I own an Audi 90 quattro limo with the 7A engine. Unfortunately, it's quite rusty underneath (beyond sandblasting), so I'm looking for some replacement parts.
The front suspension struts on the limo is 50mm wide, while the coupe is running 45mm.
I've found a decent set of coupe struts on ebay for a reasonable price, so I'm wondering if it's possible to make the switch, or if there's too much trickle-down work from making the switch
edit: those are the ones I'm looking at: http://www.ebay.de/itm/Federbeine-Au...item5d54d577b6