Announcement

Collapse
No announcement yet.

Who has a worn out 6 speed linkage?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Who has a worn out 6 speed linkage?

    I am looking for a volunteer to test a 6 speed linkage repair I have come up with.
    This will replace the old worn out ball joint with a user serviceable and replaceable part as well as replacing the NLA boot - if anyone wants a free repair in exchange for testing & feedback, please PM me

    Alex
    Panthero Coupé quattro 20vt
    Indigo ABY coupé
    Imola B6 S4 Avant

  • #2
    I would love to, but the car is off the road and hibernating under a cover. I feel so ashamed
    91CQ20v - Gone to a new home
    93UR-S4 - The Magic Carpet
    94S2Bus - The Emerald Express

    Comment


    • #3
      Yer I’m also ashamed. Mine is hibernating too, but under a layer of dust.

      Thanks for the offers, I now have a local victim who I will work with on this project
      Panthero Coupé quattro 20vt
      Indigo ABY coupé
      Imola B6 S4 Avant

      Comment


      • #4
        Good news that You guys are trying to keep the dreams alive making new parts.

        I am just pulling my engine out for sintered clutch and bottom end bearing check so If You have some kits ready I could try also. Orginal link bushes have seen 260tkm allready.

        Mika,
        S2 Avant SleeperWagon 570hv and 765nm on 2,2bar/E85

        Comment


        • #5
          Well done Alex
          keep your good work going .

          Comment


          • #6
            If you may have a spare kit available I would be willing to buy and test it, I should have my car back on the road by January as we will begin assembly after spray soon. One of my issues is the interior ball and cup which failed a second time, I have a replacement handy and ready to go for that.

            The bottom linkage cup I replaced with an 034 bearing some years ago which isn't bad but not great either honestly. If you've come up with a proper solution I would be ready to fork out the cash for it to solve my gear linkage woes
            1996 S2 ABY Silver

            Comment


            • #7
              I have to look in my stash of parts. I may have one as well. Let me know if still need one

              Comment


              • #8
                I have a new rubber boot available - but I guess your solution will not use the OEM boot...
                Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
                S2 Coupe... bit easier off the line...
                '03 ZX12-R daily hack.... lots of nice bolt ons...

                Comment


                • #9
                  Hi Alex is this the full upgrade including shifter rods?

                  Comment


                  • #10
                    Sounds interesting mine is knackered!

                    Comment

                    Working...
                    X