You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
ok so if iam going to use 034 track density edit motorsport spec gearbox and engine mounts along with ally subframe bushes there is no need for a snub?? bare in mind using for rally
thanks
mal
I run without the snub mount yes. I have the sump guard supporting the sump with a piece of rubber between which adds support. However I would still happily run without that with these mounts, they dont let the engine and gearbox move.
This is what the Track Density mounts looked like when I took the engine out. Both gone into two.
Using these mounts now, 034 Motorsport spec mounts. I'm also using these on the gearbox. I haven't taken the car yet for any road tests, wheels are still in the air, but I don't think they make alot more sound than the track density ones.
Thats exactly what I make of them! They hold the engine and gearbox solidly and means you can run without the snub. I dont think they give out many vibrations either.
ok so if iam going to use 034 track density edit motorsport spec gearbox and engine mounts along with ally subframe bushes there is no need for a snub?? bare in mind using for rally
thanks
mal
I got quite a lot of clutch and gearbox rattle, but thats just motorsport. Custom polyu. engine mounts, 034 polyu. snub mount, 034 track density gearbox mounts, alu/steel subframe bushings.
Hard. No, better than that, SOLID! Ideal for me. Not for standard road use though. Almost over engineered. I have given them some abuse and with both engine and gearbox mounts there is no movement in any direction so no need for that front snub mount.
Thats exactly what I make of them! They hold the engine and gearbox solidly and means you can run without the snub. I dont think they give out many vibrations either.
Hard. No, better than that, SOLID! Ideal for me. Not for standard road use though. Almost over engineered. I have given them some abuse and with both engine and gearbox mounts there is no movement in any direction so no need for that front snub mount.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Custom polyu. engine mounts, 034 polyu. snub mount, 034 track density gearbox mounts, alu/steel subframe bushings.
Leave a comment: