1.8t Coil Pack DIY Conversion Connector Update

[UrS4boy]

Markus Fagervik of Finland has found the allusive 4 pin Volvo/Bosch connector that takes the place of the male POS connector and mates with the four pin ECU connectors in the 1.8t coilpack conversion.

The Part No.s are:

Bosch: 1 928 402 373
Volvo: 978161 30854061 (according to the photo)

Photo is at:

http://forums.audiworld.com/s4s6/msgs/123810.phtml

The conversion DIY instructions (that I wrote) are at:

http://www.s-cars.org/postnuke/modul...rder=0&thold=0

Hope this helps somebody.

Dave F.

PS: Mike Hayes came out for one of our Vancouver BC Canada UrS4/S6 meetings. He seems to be adjusting not to badly to driving on the "wrong" side of the road.

[UrS4boy]

Even more Volvo PNs for the DIY 1.8t coil pack conversion

"Rudack" on Audi World offered even more Volvo part numbers for the DIY 1.8t coil pack conversion:

The following parts to go with the 4-pin Volvo POS connector (PN 978161)

Loose male terminals: 978299
Cable Seals: 970773

HTH

Dave F.

[Greg_S]

Ive posted the PDF of your guide

[s2dude]

Ive posted the PDF of your guide

Does this work fine for a 3b conversion then??

[Greg_S]

Good question, it really depends if the coil leads are long enough to go through the cam cover & you will also need a way to trigger the POS