RS2 tuning for my 3B

[archiboy24]

Hi Doug,

I sent you an email about getting you guys to do an RS2 setup for my 3B. Did you get it? I also contacted Bob Myers in the US, who said I'm best off to talk to you or Mihnea directly. I really need to get ahold of you guys! Please write back when you can

[Doug_RS2]

Hi Ben,

Forward the exact spec of your car and we will see if we can do a generic set of chips.

[archiboy24]

Hi Doug,

Thanks for the reply. Here are the specs of my car:

3B motor w/ stock internals
Raceware head studs
urS4 metal head gasket
RS2 turbo
RS2 Exhaust manifold
RS2 injectors
RS2 MAF (I know it's the same as AAN, but I already had it)
4.0 bar 7A fuel pressure regulator.
3B S2 FMIC and intake plumbing
3" exhaust from DP back, high flow cat and rear muffler
91 octane is the highest available in my area.

One of my questions is, if at a later time I decide to upgrade to an RS2 FMIC (which I'm told is the way to go), will I need retuning or will the ECU adapt to the better/cooler flow of air?