ready assembled dual 044 fuel pump kits

[repo]

1000hp proven, ready assembled pump kits.

Package includes:

two Bosch 044 fuel pumps
1-2 liter catch tank, even bigger tailored on request
AN teflon fuel lines
pearl fittings to connect to original return and pressure lines
new -6 or -8 pressure line from boot to fuel rail
double fuel filters
ready wired relay system with fusebox
rubber seals for hose go-throughs. (do not know the English word)

All tied up to neat sheet of stainless steel.

This package is a quick solution for all power addicts, who feel 550hp -level where single 044 is good for, is not enough.

Installation procedure is so simple, anyone can do it in an hour or two with basic tools.

Example picture of installation customer made with this kit:

http://promo.pp.fi/temp/pumppu%20inst..JPG

Package can be done to much smaller place, e.g. RS6 boot, where there is less than half of the space in use, as battery takes the other half of the spare well.

Prices start from 1400 eur, depending on options and lenghts of the fuel lines.

[speeding-g60]

rubber seals for hose go-throughs. (do not know the English word)


Grommets

[Tonks4x4]

what am i missing? Why is it so expensive? 044 fuel pumps are about £100 these days on ebay. Is there 1200 euro of pipe and filters?

[repo]

Almost 20 pcs of AN fittings and more than 10 meters of teflon hose.

Add a few hours for building the catchtank and making all the hoses and wiring.

Plus this is not ebay.

[nervas]

what am i missing? Why is it so expensive? 044 fuel pumps are about £100 these days on ebay. Is there 1200 euro of pipe and filters?

it's cheap china copies on ebay... not 044..

Will you put such pump to your 10-20kEUR engine and save 200Eur on pump?

[GazzaG60]

lookls good but im not sure on the price either. not disputing the quality.

i may be had a kit off you had i not already got everything but the filters.

[Bram]

I think it's a fair price, considering you pay for materials and labor hours which you don't have to spend yourself on time for doing research, find the right parts and to make everything fit. This is a top quality and almost Plug & Play solution.

[Jamo]

You can't put a price on plug and play BTDT

[terrybullwon]

good work repo, i spent more than this making my fuel lines, brackets and wires. As jamo said plug and play. This is where my money would have gone. Tuning these cars is never going to be cheap like a rice car.

[Jamo]

Anyone got the picture that used to be in this thread?