Milltek exhausts

[BRY]

So has mine. IIRC the version they list(ed) for the RS2 is 76mm and the version for the S2 is smaller.

Ben

You know your stuff

[Heat Seeking Missile]

Mine had a sticker saying RS2 on it, but I never thought to give it a measure

Mark

[Lloyd]

Mine had a sticker saying RS2 on it, but I never thought to give it a measure

Mark

RS2 Miltek is a nice bit kit. BTW: Do the tail pipes stick out loads at the rear?

They did on mine. I had to visit the factory to get the pipes pre-back box cut and re-welded to fit properly.

[s2avant]

They all seem to stick out miles. Mine was shortened when the 3" downpipe and front (cat delete) section were fitted.

Ben

[S2Ian]

do you have any coupe systems?

[Heat Seeking Missile]

RS2 Miltek is a nice bit kit. BTW: Do the tail pipes stick out loads at the rear?

They did on mine. I had to visit the factory to get the pipes pre-back box cut and re-welded to fit properly.

I dont know yet, its being fitted as we speak. Picking it up in an hour. I cant wait

Mark

[Lloyd]

Be careful not to trip over, walking round the back of the car!

[Heat Seeking Missile]

I've just got back, it doesn't seem to be sticking out that far in all honesty. I was expecting it to be alot worse. It doesn't come out anywhere near as far as the towbar. Will take some pics when it stops snowing/sleeting/blowing a gale.

Mark

[BRY]

Mine was fitted by a pro and it doesn't stick out at all.

[DarrenM]

I think the new Beetle suffers similar problems with the Millteks

[s2_bo]

LOL!!! thats quite some crotch extension!

[amanda]

Thats sooooo old was on here about 12mths ago if not longer

[Jamo]

Be careful not to trip over, walking round the back of the car!

Tell me about it! I've actually cut my shins on them

It's on the to do list!

[LowlanderS2]

Coming to the forum soon.............1995 ABY S2 Avant plus some mods

Thanks to Pete at Quattrocorner for the Milltek.

Is this pic any help to you guys? It all came bubble-wrapped and labelled as a complete cat-back RS2 system (two short pipe sections to come off the stock cats, one centre silencer that has two incoming pipes and one outgoing pipe, plus one back box with twin jet tailpipes). The photo is the outgoing pipe from the centre silencer section - this slides over the back box pipe and clamps together. Tail pipe external diameter is 3", but internal pipe diameter of the main system is sligthly less as Pete quotes, so 2.75" it is................?

[madS2]

How much for coupe?Any pics?