You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
The active x stuff took a while to load but its pretty cool be to able to see and move it in 3D!
Just need to get the reverse inlet first
With the Active X installed, it is un-Freaking-believable when you click the rotate button and then move the cursor down onto the intercooler. You can spin it around and look right down the inlet and outlet, into the core (might need to PAN a bit to get it there).
Looks great Carsten. I have an Apikol cast end tank intercooler on my RS2'd 93 S4 to replace a Taiwanese-cored IC (one later sold by 034). The Apikol end tanks and core were just so much nicer. I trust yours will be the same or better quality.
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
Lupo911 would there be any change for a kit for Urs4 and Urs6. I bet there should be a market for it.
Sure why not, the Problem is, i do need a car over here. I am offering the Guy, who is borrow me a car a free of charge Kit, but even then, its hard to get one here in Germany...
Looks like a standard item which is a good thing, a few Qs:-
So how much bigger is it than RS2 and will it fit under a standard S2 bumper? The RS2 one is pretty much as big as you can get give or take a 1/2 inch here or there.
Are there plant to offer it with an outlet suitable to connect to a reverse inlet so that you don't have to replace everything to go to the better IM.
How much?
Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss
Looks like a standard item which is a good thing, a few Qs:-
So how much bigger is it than RS2 and will it fit under a standard S2 bumper? The RS2 one is pretty much as big as you can get give or take a 1/2 inch here or there.
Are there plant to offer it with an outlet suitable to connect to a reverse inlet so that you don't have to replace everything to go to the better IM.
How much?
Andy,
like i said in my 1st Post, the Core Size is 500x205x85mm (OEM Size is 500x185x63mm).
S2 Front bumper will fit.
Its made to use it with the OEM S2 or RS2 IM, if you want to use the Reverse IM, use the other IC Kit
With the Active X installed, it is un-Freaking-believable when you click the rotate button and then move the cursor down onto the intercooler. You can spin it around and look right down the inlet and outlet, into the core (might need to PAN a bit to get it there).
Looks great Carsten. I have an Apikol cast end tank intercooler on my RS2'd 93 S4 to replace a Taiwanese-cored IC (one later sold by 034). The Apikol end tanks and core were just so much nicer. I trust yours will be the same or better quality.
I am glad you all appreciate SolidWorks eDrawings. I get to play with the real thing at work all day, its awesome!
Back on topic, it looks like a lovely intercooler too.
The Perfectionist
sigpic
Audi Class Concours winner Stoner Park 2014, ADI Concours D'Elegance Class Winner 2008, Runner up 2014. Winner, S2Forum Show'n'Shine Billing 2006 & 2008.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment