intake

[Jamo]

As said there are two types of bonnets, Pogea confirmed as well he's had the same issues on his installs.

[GazzaG60]

do you know what the difference is?

i saw numerous wagners at gatebil and none had the bonnet cut.

[madpugger]

I have a cr@ppy fake bonnet. I would like a genuine one if anyone has one, but will let you know how the IM fits on mine fairly soon

[Jamo]

do you know what the difference is?

i saw numerous wagners at gatebil and none had the bonnet cut.

There's a bump that the throttle can get past but when it trys to close it will stick against it and jam open.

[GazzaG60]

mines like that.

it sticks at about 3/4 throttle.

i used a panel hammer and trimmed the cable carrier.

[Bram]

mines like that.

it sticks at about 3/4 throttle.

i used a panel hammer and trimmed the cable carrier.

On my S2 ABY I had the same issue, however I don't mind removing some stuff from the inside of the bonnet to get the advantages of the reverse intake

[GazzaG60]

i removed all the front plastics. no problem.

then it still didn't work on the throttle.


i trimmed the cable holder corner and flatenend the lump on the underside edge of the bonnet.

i used some paint pen type things to colour in the cable carrier which is the bit that catches to see where its full span of movement was.