The 1000 hp barrier is now broken !!!

[Jon441cc]

http://www.motorgeek.com/phpBB2/viewtopic.php?t=9021

[S4-Sleden]

http://videos.streetfire.net/search/...4018FE4439.htm

That is NOT Jonus car........

[caterpillar]

http://videos.streetfire.net/search/...4018FE4439.htm THAT's not jonus car,but similar car......! hackeracing will go with 1000hk+too

[Audi Parts Guru]

Jonus from NORWAY broke the 1000hp with his 20v2.6l on race gas plus little NOS. With autronic fuel management system and a PT76GTS turbo.

I wonder how much BHP this would produce if it was...........

A. Still 2.2 Litre in size
B. Being run on normal gas
C. No NOS

Personally I'm not that impressed with the figures after I read the full spec

[caterpillar]

BUILD one ...... some expencive $$ i think.

[AndersS2]

thats a swedish called martinsson! (GTmartinsson on zatzy.com)
that car is also very fast, and he know how to abuse it and make some show for us "bird watchers".

[Jas11n]

http://videos.streetfire.net/search/audi/8/CC321CBB-D785-4A90-B64D-CC4018FE4439.htm

Madness It's like he is purposely trying to destroy it

[Henka]

The guy doing the doughnuts in that video is the very same guy that we saw a while back in a clip drifting with a S4 V8 in a roundabout - remember?=

[Silverboy]

I wonder how much BHP this would produce if it was...........

A. Still 2.2 Litre in size
B. Being run on normal gas
C. No NOS

Personally I'm not that impressed with the figures after I read the full spec

`
it prodused 785hp on 98 fuel.. No NOS, but still 2,5litre.. not impressive? on a "budget" engine whilst building a even more powerful engine for drag use..
I'm impressed

[Albert]

Engine is 2,5 liter 20v turbo

I have three simple questions:
What stroke ? 95.5 mm or 92.8 mm ?
What block ? Stock S2 or Diesel 236mm block ?
What bore ? 82mm, 82.5mm or 83mm ?

[caterpillar]

jonus engine: 95,5 stroke(dieselcranc) 81mm bore,or it was rebored 82.00 and the diesel block 236deckheight. custom cams,(i think 262^ and 11,25lift)

[ctolladay]

Put it in a chassis and then measure it again before I'm impressed. I'm sorry but setting things up in an ideal enviroment and claiming big power is not impressive. Put the power on the tarmac and see what happens.

1/4 mile times are the way to measure the results of hard labour. It takes a lot of skill to set up a car and even more to control it of the lights. Join these skills in one person and I will worship!

[Albert]

jonus engine: 95,5 stroke(dieselcranc) 81mm bore,or it was rebored 82.00 and the diesel block 236deckheight. custom cams,(i think 262^ and 11,25lift)

Then his egine is 2522cm3 acording to this calculator

http://davewin.com/tech/engine_displacement.shtml

In the past it was mentshoned that it is 2.6L but it is just 2.5L

[Audi_CQ]

Put it in a chassis and then measure it again before I'm impressed. I'm sorry but setting things up in an ideal enviroment and claiming big power is not impressive. Put the power on the tarmac and see what happens.

1/4 mile times are the way to measure the results of hard labour. It takes a lot of skill to set up a car and even more to control it of the lights. Join these skills in one person and I will worship!

With is old engine he did 10.0x at 239 km/h....... so start practicing this:

[caterpillar]

BUT: it was a 2500ccm engine that too