Tweet
solved the problem was the light switch that seems to make contact with the climate control
-
solved the problem was the light switch that seems to make contact with the climate control -
You do not have permission to view this gallery.
This gallery has 2 photos.Comment
-
other question, this can be connected as you want I have in a verse?Comment
-
well done.
Not 100% sure what you are asking, do you mean in reverse? I would put it back as it was, 're do the wires and use good heat shrink insulation to make good.
Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
you put it back as it should but the yellow / black and purple / black wires have a direction towards the sensor?Comment
-
I had a search for you and this post has the schematics for auto air con. Hope it helps.
https://www.s2forum.com/forum/techni...rol-schematicsNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
settled the wires now I kindly ask if any of you knew how to solder them to the iat g42? i have two wires black purple and yellow black Thanks againComment
-
-
Thank you very muchComment
Comment