Audi rs2 alarm + pneumatic closing PB

[bout1977]

hi , last morning I've a little suprise : when i open the doors , the alarm honk and IS on , and when the doors close ,the alarm IS off . i try all the day and dont understand how it was possible .
so i desassemble the compressor , and change electric motor polarity , and bypasses the pressure acuator . the alarm was good for 1 day . and this morning it was again in the wrong way ...
I loose my mind ???

[Tom_]

you have to check the wiring diagram, take your multimeter and start checking and measuring. Honestly, if its not stock wired from factory i would remove all those junk from wiring. Have a really bad experience with something "added" onto the stock wiring...

[david1980]

Use the key in the drivers door to lock and unlock it

[bout1977]

with both keys and remote it does the same symptoms. the wiring IS 100 % stock .

[Robertbozic]

you have to check the wiring diagram, 3d Trcek take your multimeter and start checking and measuring. Honestly, if its not stock wired from factory i would remove all those junk from wiring. https://eldfall-chronicles.com/product/slayer-dragoon/ Have a really bad experience with something "added" onto the stock wiring...

You definitely have to check the wiring diagram first!