new wheels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • s2robbo
    S2Forum Enthusiast
    • Mar 2008
    • 111
    • Country: United Kingdom

    #1

    new wheels

    hello all. can any one help me . im going to lower my s2 avant 30mm and im getting new wheels im just wondering if they will rub they are kei flux with 225 40 18 with et28 if anybody can help i would be most greatful.thankyou.
  • s2_bo
    S2Forum Zealot
    • Oct 2005
    • 6067
    • Home: United Kingdom Current: France

    #2
    Mine were fine on ET 35's lowered on billie's and HnR's but ET 28 sticks out a fair bit more so you might find that they rub. It would look good though
    91 S2 coupé - RIP
    98 S8 - Luxury barge

    Comment

    • s2driveruk
      Super Moderator
      • Jul 2003
      • 12696
      • Country: England

      #3
      ET30 on that rubber still clears ok, though i think you might start touching the outer rim of the arch under heavy breaking or sudden road undulations. rolling the arches should sort you and it will feel nicely planted as you have widened the track of the car from ET37 to 28
      sigpic

      1992 3b S2 Coupe

      Comment

      • Rusty
        Super Moderator
        • Jun 2004
        • 18953
        • Country: United Kingdom

        #4
        Originally posted by s2driveruk
        ...it will feel nicely planted as you have widened the track of the car from ET37 to 28
        Not forgetting that you'll get 8x18 to replace 7x16 so your actual width will change by 9mm offset plus 12.7mm rim width so just over 20mm. Not sure how much you'll need to mod the plastic arch liners if it rubs. The rear arches are already pretty much rolled for you too
        Cheers'en, AndyC
        1994 ABY Coupe - Projekt Alpinweiss

        Comment

        • s2robbo
          S2Forum Enthusiast
          • Mar 2008
          • 111
          • Country: United Kingdom

          #5
          thanks guys just found out that i can get et35 et40 in the same rim .any recomendations . thanks.

          Comment

          Working...