will a 10vt bolt up to my 20v tranny?

[mike_pops]

will a 10vt bolt up to my 20v tranny?(cq) , also is there anything thats a real pain in the *** with this swop?

[spink]

you may have to put in a new bearing in the end of the crank depending on hold old the engine is.There are 2 different sizes, as i found out.

[Vagsport]

If your Coupe q is RHD, the 10V turbo will not fit into your engine room, as the position of the waste gate fouls the servo. You'll have to get the ex manifold chopped and reworked, so the waste gate sits at least between cylinders 2 & 3.

Siena

[Vagsport]

Best way to get round mating the 10V turbo to your 7A tranny is to used the 7A clutch and flywheel.

Siena

[S2central.net]

If your Coupe q is RHD, the 10V turbo will not fit into your engine room, as the position of the waste gate fouls the servo. You'll have to get the ex manifold chopped and reworked, so the waste gate sits at least between cylinders 2 & 3.

Siena

or relocate/remove the servo ?

[mike_pops]

thanks guys for the replys