Stroker with GTX35/82 on E85

[hammer]

Hy, what do you think of my Dyno result?

[vcosmin]

it seams almost wow, 1000 nm ? and such wide powerband ? 3 bars boost ? absolute pressure ? i really dont trust dynos so much, do you have some acceleration times ? the dyno looks great from my point of view.

[targus]

Just a shame uk don't sell e85

[hammer]

on street i have 2.8 bar, that is everything the gtx35 brings. the dyno is 100% correct and on 1/4 mile 11.oo and 230km/h (s2 avant with 1500kg) but is was just one run

[Biturbo]

on street i have 2.8 bar, that is everything the gtx35 brings. the dyno is 100% correct and on 1/4 mile 11.oo and 230km/h (s2 avant with 1500kg) but is was just one run

Very impressive result on dyno.That should run in 10s.That is your 60ft time for that run?
Can you write full your engine mods?

[Rocco]

Rev to 8k with what kind of stroker?

Very nice figures


Tell us all your engine specs please and feel free to start your presentation or project thread

[Billman]

VERY NICE!!!!

Can you please give more specs about the engine, camshafts, head, valves?

In what gear was the dyno made?

[prj]

Would be interested in seeing some 100-200 times.
11.0 is a very bad time for this kind of power IMO.
But then again, drag times are a poor indication of power, the trap speed is more interesting.

As far as dynos go, Dynojets are pretty much the highest reading dynos out there.

[Pat D]

I feel like dumping my pte 6262 and replacing it with gtx35 now.

More details??

[vcosmin]

Would be interested in seeing some 100-200 times.
11.0 is a very bad time for this kind of power IMO.
But then again, drag times are a poor indication of power, the trap speed is more interesting.

As far as dynos go, Dynojets are pretty much the highest reading dynos out there.

Trap speed for and 1300kg / 670 hp car, is 230kmh - tested many times.
What i think i really nice for this turbo / engine combo, is that it has 1 bar@4500 rpm, and keeps power all thw way to 8000rpm. It will be intresting to see what headwork / cams it has.

[Billman]

I asked also about cams and gear because the 1 bar mark seems pretty slow to me....

[MrVain]

Whats the power on the weels/hubs?

[hammer]

the specs of my engine:

95.5 crankshaft witch i milled, now it have 18kg
cnc portet head
supertech valves
cams with 270° and 11mm lift
selfmade inlate manifold
1600ccm injektors (72% duty)
furans ex..
gtx35/82 with tial housing
3.5" downpipe
044 fuelpump to catchtank and a aeromotive a1000 to rail
vems

[hammer]

i think the dyno run was in 5 gear. on the street it makes 2.8 bar @ 4.500rpm

[Biturbo]

i think the dyno run was in 5 gear. on the street it makes 2.8 bar @ 4.500rpm

usually dyno doing on 4 gear.2.8 bar is a lot .Any foto of your engine bay?