anybody on here done a s2 audi 80 quattro b4 sedan

[micky]

as title anybody made a s2 out of a b4 lhd 80 quattro 2.3 .
i am trying to convert mine but don't know what parts to get because its a miss match of both cars . like drive shafts hubs and carriers .brakes ect
i will be using the standard drivetrain but want s2 5x112 hubs which are a lot thicker splines and a bigger bolt .HELP PLEASE

[poor-boy]

Micky, S2 Avant the rear end (subframe, struts etc) all drop into the Audi 80 B4 saloon Quattro.

Then everything on the front end is all kind of the same but not sure on engine mounts

[micky]

Micky, S2 Avant the rear end (subframe, struts etc) all drop into the Audi 80 B4 saloon Quattro.

Then everything on the front end is all kind of the same but not sure on engine mounts

i have been told that the advant drive shafts are longer and too wide for the saloon ?

[poor-boy]

Ok.. right there are a few saloons converted to S2 using complete Avant rear end (running gear) and never said about shafts.

[micky]

Ok.. right there are a few saloons converted to S2 using complete Avant rear end (running gear) and never said about shafts.

thats if they replace everything ? im not maybe the rear diffs different ??

[poor-boy]

Yeah thats if you take the complete rear end off the avant and drop it into the saloon.

Not sure on mix and matching matey sorry.

Iam sure Dave had the complete lot when he broke the S2 avants

[micky]

Yeah thats if you take the complete rear end off the avant and drop it into the saloon.

Not sure on mix and matching matey sorry.

Iam sure Dave had the complete lot when he broke the S2 avants

yep but is all pricey must be a cheaper way

[poor-boy]

yep but is all pricey must be a cheaper way

Yeah it does get expensive

[micky]

Yeah it does get expensive

i know someone who has done a v6 one but thats different again

[bluequattro]

Last diff and rear suspension went last night
If shafts are too long you c an get them shortened I'm sure

[Error404]

Easiest & best way is just to fit compete S2 avant running gear. Not cheap, but if a jobs worth doing, it's worth doing properly.

[vag_nutter]

You can use b5 quattro rear hubs in the b4 to convert to 5x112, s2 in the front. s2 avant drive shaft to go with the 01e, and the rest is all pretty much self explanatory. I have just done this with a b4 v6 sedan

[Rocco]

I've driveshafts, RS2 rear diff, 5x112 hubs, rear S2 avant suspensions....

[micky]

Ive got rear s2 hubs and carriers and drivre shafts bur standard diff

[Mcstiff]

Here's a usdm 12v B4 to "RS2" build, should be similar. http://motorgeek.com/viewtopic.php?f=6&t=34531&start=0