Announcement

Collapse
No announcement yet.

Any help with Fault codes?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Any help with Fault codes?

    Hello so next to a few audi's i got a SSanyong musso 1996 3.2 with MB 104 engine from mercedes G class to pull the trailers with cars on but the car is not driving like it should
    I managed to pull these errors out of the car 031 you can ignore as that is LPG problem.


    So anyone any idea what could cause
    Misson protector fail
    Short term self adaptation fail

    Are those vacuum leaks, electrical problems, fuel problems, fuel mixture, timing chain almost gone we really have no clue at all.
    You do not have permission to view this gallery.
    This gallery has 5 photos.

  • #2
    the 075 should be clear, bad knock sensor
    many of the others COULD be caused by a bad lambda of MAF. try measuring those

    Comment


    • #3
      031/ 075 is very clear indeed But something triggers it sensor is new.
      Lambda sensor is new too. (1y old)

      Maf yes possible but switched that with the donor car too same problem.

      Comment


      • #4
        start measuring ohms and volts then, that often tells you whether or not a part is OK.
        you might need to do some creative wiring to be able to measure when in use.

        Comment

        Working...
        X