Carbuator question

[Billman]

yes i thought about it. It is the easiest way.

[Pirvu Eugen]

Does it flood on all 4 cyclinders? Must be a float issue. The only way to stop it flooding if its the pump is to turn the pump off a minute or two before turning the bike off. It will then use the extra fuel rather than flooding it self.

But this will not stop the flooding during engine running( high fuel consumtion)....you need the pump to feed the fuel to carburators...but with an certain amount off pressure and flow.
You can make an T on the feed hose to the carbs and from that through an restrictor..back to the tank. But i cant tell you the restrictor diameter though.

[Billman]

i already thought about it, this way it would drop the pressure a lot!

The pump is actually needed just to flow gas to the carbs, nothing more. Consider the bike runs even without pump but above 7000 rpm it gets lean