After some advice and a heat shield!!

[anthonys2]

Hi! Am after some advice am wanting my chunky original windscreen wipers replaced with modern aero type and to replace the chunky arms at the moment is there a VW version I read that's a simple replacement (plug n play) please?? Also after a heat shield for the rear back box am assuming it's n/a from Audi but did I read there is the same size that fits made by Jaguar?? Any help on both would be great thanks

[LSG]

Piotr . Peter did us heat shield from a jag . He works for Lancaster's maybe have a look for his build thread or pm him . He's a great chap and wouldn't mind. He'd also have the part number . Hope that off help . Cheers Lynn

[rxl]

Jaguar: C2P24830

[recurveandy]

C5 A/S6 arms fit the coupe, although the wiper blades do need the ends trimming 20mm or so, to stop them catching
I have a set lying around

[anthonys2]

You guys are absolute top notch thanks for your help this is what this forum is all about.

[M_GORDON]

C5 A/S6 arms fit the coupe, although the wiper blades do need the ends trimming 20mm or so, to stop them catching
I have a set lying around

The two arms? Or a pair of an arm?

PD. I remember that the C5's arms ar too fat with central holes, true? I saw in the past a RS2 with some light arms like ours.

[Error404]

There are two spindle sizes on the C5; I have posted the part number that fit (RHD) on the forum a few years ago. I will try and find them...
The passenger wiper blade needs to be shortened.

[Tractor Dave]

I made my own from aluminium sheet. A fold and a bend plus some riveting. All done for a fiver


Sent from my iPhone using Tapatalk

[anthonys2]

There are two spindle sizes on the C5; I have posted the part number that fit (RHD) on the forum a few years ago. I will try and find them...
The passenger wiper blade needs to be shortened.

ok thanks for your help! I wasn't sure if I read on here somewhere that a VW Lupo fits the S2 Coupe with the help of a little trim?

[anthonys2]

I made my own from aluminium sheet. A fold and a bend plus some riveting. All done for a fiver


Sent from my iPhone using Tapatalk

Impressive should last for a while to!!

[steve briance]

I've got aero wipers on my coupe. Got them YEARS ago from VAGparts. Seem to recall one was a polo arm, the other for an A4. Have a Google bunging VAGparts into the search and see what comes up. They were Deffo plug and play with no trimming required!

[Error404]

IMHO the A6 arms look a lot better and they certainly work better at high speed due to the stronger springs - here are some pics of mine from back in the day:














Parts numbers for the RHD arms which fit the smaller S2 spindles are:

4B2 955 407 C
4B2 955 408 C


HTH
Alex

[anthonys2]

Thanks Alex that's absolutely spot on and what am after I will be ordering them shortly!! Thanks mate appreciate you taking the time to upload the photos