question for a rs2 driver

[EspenW]

My RS2 takes approximately 6.5-7.0 liter per 100km on the highway (36.187831-33.602986), average is 9.0-9.5 (26.135656-24.760095). Using 391cc injectors with MTM 375ps software.

Onboard computer will show faulty numbers when running different size injectors from stock (or different fuel pressure)

[|Maku|]

Onboard computer will show faulty numbers when running different size injectors from stock (or different fuel pressure)

Well, a friend of mine who has completely stock RS2 uses the same software and numbers are the same. Believe it or not!

[EspenW]

Well, a friend of mine who has completely stock RS2 uses the same software and numbers are the same. Believe it or not!

That is no surprise. The difference is that his numbers are closer to reality, since the computer thinks that the injectors in yours are still stock.

Is the MTM program for stock injectors? If so, have you lowered the fuel pressure to compensate for bigger injectors?

[UrS4boy]

Onboard computer will show faulty numbers when running different size injectors from stock (or different fuel pressure)

On board computers do not give you 100% accurate fuel use numbers even with everything stock. Typically, they are optimistic (more distance per fuel used than in reality).

The numbers that were throw out there seem to be a bit "off" (as in rotten/wrong)

10L/100km is 2.2 Imperial Gallon/62.1 miles = 28.2 miles/Imp gal (let's not even consider the smaller US gallon).

Therefore 20L/100 km = 14.1 miles/Imp gal
5L/100 km = 56.4 miles/Imp gal
6L/100 km = 47 miles/Imp gal
7L/100 km = 40.3 miles/Imp gal
8L/100 km = 35.2 miles/Imp gal
9L/100 km = 31.4 miles/gal

20 mile/Imp gal = 32.2 km/4.54 L = 14.1 L/100 km

etc where 1 Imp gal = 4.54 L and 1.0 km = 0.621 miles