All torque..

[Flat on my back]

Anyone got recommendations on a good wrench, 1/2 inch drive and maybe a defection type as opposed to ratchet.

[GazzaG60]

i got 2 from halfords. 1 1/2 inch i got for head bolts etc and one thats low settings for cam caps etc in 3/8

seem good.

i used ft for the crank bolt with a 3/4" arm and a bar on it.

[mcandmar]

Teng tools get my thumbs up, bought them all on ebay. As above a 1/2" for suspension stuff, 3/8" for acuracy on low torque nuts, and for the crank pully nut i picked up a big four foot long Norbar rated to 1000ft/lb