-
-
.
What hardness have you gone for?
Machining...the bushes or the steel inserts?
Just curious...PF car bushes are all in the Shore A range.Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
That price is just for the poly blanks, then theres machining them and the steel inserts,
you have to pay up front for a mould to be made £170-00.
They have told me that it would be shore 90, they reckon i wont be able to machine shore 70?? to soft.
Have read someware that you need to freeze s70 to make it harder for machining, no problem.
There going to let me have sum samples for machining before i commit an order.
I do now a company that sells it in rod form, but not that size 90dia.
Going to suppliers tomorrow
Will know more tomorrow, Carlos
KevComment
-
that is really expensive Kev, i got quoted for casting the bushes you are looking at for me about £6 each segment and £80 for the tooling IIRCPanthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
Yes Alex, your right it is expensive, but the rear avant bushes are huge compared to yours??? 90mmdia x 40mm thk, will start looking for other suppliers tomorrow!
PPL (polyurethane products ltd) are only 20mins away, right next to a customer of mine, they have sent me some brouchers, so mite send drawings to them for quoting.
Comment
-
jeebus! didn't realise they were that big
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
they are huge! no joking, the OEM is approx 90mm diameter and 120mm high
One thing i've learned we are way behind the Scandinavians!Comment
-
Bieeeeeeeeg...
Like this...Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
Comment