Audi 80 Saloon S2 nearly finished!

[will20v]

we do every car different so never keep stock of pipework as its pointless.
each time we do a car we drop it off with a to-do list and where we want stuff and jc weldfab fill in the gaps for us

[europeanme]

yeah i made them all myself as i am a amazing fab and welder!
not really had them made by JC weldfab in wellingborough

http://www.jcweldfab.co.uk/news/2011/08/15/audi-s2-quattro-monster-6355-bhp/

you said them...have you got any for sale??...

[will20v]

my head is ok at the minute but my brain has never been any good so no probs there.

[Rocco]

And max power by rev limit! With your turbo ,you would be very happy revvingthe engine to 8500rpm .

How do you feel your back , neck and brain passed 5k rpms??

[will20v]

Dyno graph with both runs on it. run 2 we let off as it started to run lean as we maxed the injectors out.

[Rocco]

Thanks again Will.

Good luck with your 80 project

Next day more power with the bigger injectors!

[will20v]

7900rpm should be fine with stock oil pump. 8000rpm upwards is not good as you are likely to spin the bearing shells but not always just depends on your pump i supose.
Mine will spin the shells now i have said that

[Rocco]

it makes power all the way to the rev limiter at 7500 so it will be raised to 7900
and it makes 350 bhp @5000 rpm. i will load the graph soon as it comes through from doug.
it has no ignition timingin it from 3000-5000 rpm at the moment as we have not put any in yet after the last turbo was fitted so it will be better once that is done also.

Thanks Will

And are you planing to use the oem oil pump and cams for 7900rpm?

I believe to heard from Doug about stock oil pumps are not too good for more than 7500rpm...
In my competition I have high lift cams ,good for 8700rpm,but the oil pump is from ABY engine..so I am worried for it.

[will20v]

it makes power all the way to the rev limiter at 7500 so it will be raised to 7900
and it makes 350 bhp @5000 rpm. i will load the graph soon as it comes through from doug.
it has no ignition timingin it from 3000-5000 rpm at the moment as we have not put any in yet after the last turbo was fitted so it will be better once that is done also.

[pixsaudisex2]

free power!! and im well too fat

Think this will be my next power upgrade also.

[Jamo]

Nice! be interesting to see with max boost and bigger injectors! Going to be an animal!

[Rocco]

free power!! and im well too fat

can you show us the dyno draw?

is it too laggy or not? because maybe if you have the real power at about 5000rpm with stock cams you only can go to 7300rpm true? so is a little power band?

fit high lift cams + a better oil pump`and go to 8500rpm ,shoul be awesome¡¡


congratulations for the numbers, i am shocked

[epic]

[will20v]

free power!! and im well too fat

[epic]

Why are you going on a diet?