Any Allroad drivers here?

[Knight Rider S4]

HAve just seen a friend of mine and he has a few issues with his Allroad

Stuck in low range and wont come out , has changed the ecu unit for the gearbox but no joy

Have run vag.com on it and has come up with this

ABS
01324 Control module for J492 AWD
18036 Powertrain , steering Angle Sensor

AWD

G302 Hydr/Actuator position sensor no/incorrect basic settings adaptation P1807-000

rare model as manual not auto , has button on gearknob for changing into low when activated with Clutch, wheel as are quite cool to have double faces on them for strength

Does the ECU for box need sycronised with VAG.com?

Cheers


Steve

[audinut]

steering angle sensor can be reset in vagcom with basic settings.

not sure on the other stuff

[Knight Rider S4]

Steering Angle sensor settings , does this have to be done with canbus lead ? or is it a simple case of resetting ?

[dest]

Have a read here mate

http://audisrs.com/about31188.html&h...g+angle+sensor

[Knight Rider S4]

Cheers ...just need to work out how to get the AWD out of low range ????

[4WheelDrifter]

Our Lupo uses an electro/hydraulic system for the gearbox. If there is ever a problem, the first thing to do is check the hydraulic level, that will normally sort things. If that fails, then do the basic settings. Then you can start fault finding if a fault persists.

[Knight Rider S4]

Geat Stu , will check that out , need to find the basic setting out , will that come up on the VAG.com ?

Cheers


Steve

[audinut]

basic setting info is pretty well documented through ross tec IIRC

[audinut]

http://www.ross-tech.com/